Dwyer Instruments 1823-0 Dwyer Series 1823 Low Differential Pressure Switch with Conduit, Range 0.15-0.5"WC

".15/.5""WC Low Differential #Sw"

Dwyer-1823 Series-Switch Type: Differential Pressure Switch, Adjusting Range: 0.15 to 0.5 inch WC, Switch Type Designation: Low Differential, Body Material: Plastic, Enclosure Subcategory: NEMA 4X/12/13 Coil Compartment Depth: 4.00 Inch, Coil Type Designation: Dwyer Oil Proof Leakproof Hermetically Sealed Air Operated Switch Range 2A, 250A, 250VAC or 552VAC at 30VDC with Max 15VA/115VAC or Max 30VA/230VAC Coil

#Dwyer Series 1823 Low Differential Pressure #Switch with Conduit has an operating range of 0.15"WC to 0.5"WC The control #is a compact, electronic pressure switch that can be used on equipment such as vacuum pumps, trash compactors #and transfer pumps. It features a maximum #operating pressure of 150 PSI and has a max current draw of 2.27Amp at 120VAC. This mounting switch displays the set point pressure on a digit readout and accepts 4/10/20 mA output for remote monitoring.

Low differential pressure switch for air conditioning and gas applications. Maximum pressure setting of 0.5"WC, maximum temperature 400°F (204°C) and for low pressure side 1/8"NPTM (0.28mm).

The Dwyer Series 1823 Low Differential Pressure Switch with Conduit, 0.15?WC is used for contamination control in air filtration systems or air conditioning equipment where 25% (FE-25) or 50% (FE-50) clean air is required. For maximum protection, the low differential pressure switch has two options of conduit...

A medium vacuum range switch with a low pressure differential of 0.15" WC to 0.5" WC. This is normally open contact and works with air, gas, steam, and other non-corrosive liquids and gasses. It has an AC relay output power rating of 2 amp @ 100 VAC.

The Series 1823 Differential Pressure Switches are compact and used in applications where accurate closure is required. These switches are available with either a Normally Closed (NC) or Normally Open (NO) contact output. They are used primarily for water-level control applications in toilets, sumps, boilers, process towers, etc., in which the difference between the upper and lower levels is 0.15?WC to 0.5?WC (3.8 mm to 12.7 mm WC).

This Dwyer Series 1823 Low Differential Pressure Switch is for use with Buchi V40i Series, and V60i Series high-temperature industrial process controllers. It provides the differential pressure between a process and atmosphere in an air or dry gas stream with up to a 50 PSI differential pressure. The switch has a female NPT threaded inlet and outlet connections, and 40 PSIG maximum supply pressure.