Dwyer Instruments A-299 Dwyer Flat Steel Mounting Bracket for Flush Mount Gauge, 6.3" x 7.7" x 4.0"

Mounting Bracket

Contains mounting bracket, bolt, and self-tapping screw.

Our Flat Steel Mounting Bracket is designed to be used with A-299 Series Gauges to mount the gauges inside a panel. 6-1/4" x 7-3/4" x 4".

Mounting brackets are required to install gauges into a panel. Each package contains one mounting bracket and two snap-lock fasteners.

The Dwyer Flat Steel Mounting Bracket is used to mount any Dwyer Instruments Liquid Level Gauge. This Mounting Bracket is made of steel and will fit either a 0.750" or 1.50" diameter hole.

The Dwyer Instruments A-299 is a mounting bracket designed to allow the mounting of 1/2 inch Submersible Pressure Gauge, 0 to 4 inch Hg in readability. The mounting bracket makes assembly easy by providing a single module that self-aligns upon installation. Made of durable steel for long life.

The DWYER®-A-299 Flat Steel Mounting Bracket is suitable for use with DWYER® Series Gauges Number A194H, A-1325G, A-1326G, and A-1394G. This bracket provides a low profile and accommodates the mounting of the gauge head directly to the surface with four screws so that it appears as if the gauge is floating. The flange can be sized to accommodate almost any measurement using a standard 0.02" (0.5 mm) sheet metal snipping tool. The DWYER®-A-299 measures 6

This A-299 mounting bracket is for mounting Dwyer flush mount gauges in hard to reach places. The flat surface on the bottom helps keep the gauge level. Requires existing nuts, bolts, and holes be present prior to installation.