Aluminum Surface Mnt Bracket
The Dwyer Instruments A-368 aluminum surface mounting plate is used in conjunction with model PL500 and PL350 series Dwyer pyrometers. It provides a simple, convenient, and economical method of mounting either liquid-in-glass or solid state glass bulb pyrometers. Base plate is 1/4" thick machined aluminized steel with 6 slotted 1/8" diameter holes for securing bracket with machine screws (not included). The base plate has a 2.7 inch diameter hole to allow for wire passage. Connecting cable is sold separately.'
Surface Mount Bracket for Dwyer Magnehelic® Gauges. Includes stainless steel mounting screws.
The surface mount bracket for the Magnehelic Gauge provides for an enhanced installation in several different applications. The bracket allows a clean neat installation that is easier to access and maintain for building owners, facility managers, and maintenance staff.
A-368 Surface Mounting Plate for Dwyer Magnehelic Gauges
Surface Mounting Plate for Magnehelic Gauges.
The surface mounting plate is designed for mounting any of Dwyer's Magnehelic Series gauges to a flat surface. Constructed from aluminum, this NSF certified plate has a 6-32 tapped hole in the center for mounting directly to a pipe or flat surfaced enclosure. It also comes with two ¼"-20 threaded holes on the top and bottom side for additional mounting methods.
The A368 Dwyer Surface Mounting Plate is used to mount E-Series Magnehelic gauges. The mounting face is 1.20" in diameter and is 0.75" deep with the screws (A-34014) and nuts (A-34040) used for the mountings. It is made from extruded aluminum, and includes hardware: four #8-32 x 1/2" flat head screws, four #6-32 x 13/16" flat head screws, two 5/8"x11/4" lock washers and two 1/4"-20 x 13