Dwyer Instruments L6-EPB-B-S-3-H LiquidLevlSwtchExpPrf 250#max

LiquidLevlSwtchExpPrf 250#max

The L6 EPB is a well specified Expansive Pressure Switch capable of sensing pressure in hydraulic or pneumatic systems up to 250# maximum. It is 3 point isolated with an adjustable programmable 4 to 20 mA output. This switch features a sealed liquid filled sensing head housing two switches manufactured using self-lubricating stainless steel bronze like contacts for long life and dependable operation. Its easy to clean and maintain via an easy to reach PC board that is internally mounted on a large NEMA4X/IP65 rated skirt, and beyond the reach of most service fluids. The L6 EPB has

Our LiquidLevel Switch is a back-pressure, submersible sensor. This product is designed for monitoring liquid level and switch status through shielded co-ax cable. A switch output may be used to control a pump while the input may be monitored for level status by external equipment. This environmentally protected, high dielectric strength device contains a 1/8" NPT connector and 4 pin thermocouple auxiliary connection.

The Liquid Level Switch, Series: L6-EPB-B-S-3-H, is a NEMA 4X, IP65 (NEMA Type 4X is dust-tight and protected from contact with fluids) liquid level switch which has a bronze body. The switch has a maximum switching distance of 3" (76.2 mm). For lowest loss the switch has a low fluid compression spring which will provide longer life by preventing fatigue cracking and eliminating the need to add an air bladder. . The Liquid Level Switch is suitable for use in pulp mills and other similar applications.

The L6 Liquid Level Switch is an explosion proof, liquid level switch. It offers a compact design and will monitor the level of oil, water, solvents, alcohols, acids and other flammable liquids.

Simple, easy to use and safe! Choose this pressure switch to use in your liquid level control system. Sized for 24 VDC and rated 1/4" NPT input. The maximum pressure rating of the switch is 250 PSI (1.72 bar; 17.2 mbar). Includes an extended probe for extra long installations.

This liquid level switch can handle temperatures up to 140°F (60°C) and has a resistance range of 0.05 to 248 ohms. It features an adjustable float, is UL/CSA listed for accuracy, and has a large 6 in (15 cm) stem that makes it useable in a variety of applications.

The L6-EPB is a high quality, explosion proof liquid level switch with stainless steel bails and encapsulated reed switch. It is designed for mounting on tubing up to 7/8", Class I Div 2 for use with flammable or combustible liquids.