Fireye E110 E110 FLAME MONITOR CONTROL CONSISTING OF

FLAME MONITOR CONTROL CONSISTING OF

Fireye E110 E110 Flame Monitor Control Consisting of:

With FLAME MONITOR CONTROL, you put the power to increase kitchen safety into your own hands. Whether it's a gas stove, electric broiler or an oven, we've got you covered. And to support your equipment and the mission at hand we've engineered solutions that meet commercial requirements for heat, flame and smoke detection.

The FLAME MONITOR CONTROL is an intelligent, fiber-based flame detection and suppression system designed for use in the process industries. The two tier sensor architecture enables on-board alarm processing and provides automatic zeroing capabilities of its internal signal source to prevent nuisance alarms.

The Flame Monitor Control (FMC) is a Flame Monitoring Device connected to the back of APD Thermal radiation sensor. The Flame Monitor Control provides a flame monitor panel for the fire watch crew and allows remote and local disconnection of the thermal radiation sensor from the FMC system.

The E-110 Flame Monitor Control with Battery Excitation provides a fire detection and signaling solution for low- to medium-hazard applications. It detects flaming or smoldering fires where smoke detectors cannot reliably operate due to excess heat/flame conditions.  The E-110 consists of a flame detector, a signal processor, which provides the necessary power for the detector plus external signaling devices or modulated signal outputs for initiating building evacuation, and an enclosure module that contains the power supply and controls.   Fireye has 3 different products in this category. The prices are the same, only the descriptions vary to stress different features.

The E110 is a single detector or Measuring Point (MP) Flame Monitor Control, including two (2) flame detectors. The E110 controls one (1) remote audible alarm panel. This unit also supports the addition of two (2) local audible alarm panels for a total of three (3) Local and One (1) Remote audible alarm panels.

The flame monitor control kit is a complete electronic system that can be mounted in a control panel, on a wall or under or over a counter. The kit consists of a flame monitor, flame detector, and controls mounted to a metal box.