Honeywell 128423 Analytics E3SRMCO CO Remote Sensor -4/122F CO Remote Sensor -4/122F

SURFACE MOUNT REMOTE CARBON MONOXID

The Honeywell Analytics E3SRMCO surface mount remote carbon monoxide sensor is a device designed to detect low levels of carbon monoxide. The sensor uses an advanced, passive infrared technology that enables the detection of excess levels of CO in a room. Simple and user-friendly, this sensor detects small amounts of CO so that the user can take appropriate counter-measures to fix any problem, before it becomes serious.

The 128423 Analytics E3SRMCO surface mount carbon monoxide (CO) remote sensor is a thin-profile, low-profile, hardwired device that, when used in conjunction with the Honeywell Analytics E3RF receiver module (sold separately), provides real-time residential and commercial carbon monoxide (CO) levels. You can easily monitor CO levels in rooms of your house or small business remotely.

The Analytics E3SRMCO is a surface mount carbon monoxide remote sensor that provides real-time verification of installation and operation of the B135 Climate Line. The E3SRMCO installs at the next highest room level to the B135 Climate Line and receives wireless data regarding CO concentration from the instrument.  The user must also provide a 4/20mA transmitter/controller for field level sensing in order to receive safety CO information on both levels.

Open your door to the world of peace of mind with the E3 Remote Carbon Monoxide Sensor. Built with an internal alarm and battery backup, this simple-to-install sensor sends alarms to your Honeywell home monitoring system when carbon monoxide levels are dangerously high.

This surface mount CO sensor is easy to install and can be...

... Measures carbon monoxide levels and transmits them through up to 20 ft of cable to external monitors. Ideal for room, house and building carbon monoxide monitoring.

The A3SRMCO is a remote sensor designed for use with the Analytics E3 Series. It features a sleek surface-mount design with push button release. Output is four wires, two for power and two for monitor output. This sensor is an excellent choice when mounting in close proximity to the furnace is a concern, or if the wall thickness is more than 2".