Johnson Controls 3439 ELECTRO PNEUMATIC TRANSDUCER 3-15 PSI HI VOLUME

ELECTRO PNEUMATIC TRANSDUCER 3-15 PSI HI VOLUME

The 3439 ELECTRO PNEUMATIC TRANSDUCER 3-15 PSI HI VOLUME from Johnson Controls is a high-pressure transmitter which includes a nylon/fiberglass package and a 15 foot connector cable for input and output connections. The transmitter has a standard NPT female inlet, a carbon steel housing, and a 4 wire terminal configuration to match with most field devices. The accurate system range provides 45 psi to 75 psi of pressure range, allowing it to be used with various pressure products from Johnson Controls. This product has been tested and validated for compliance with the requirements listed in ANSI/

The Johnson Controls 3439 ELECTRO PNEUMATIC TRANSDUCER 3-15 PSI HI VOLUME sensor is designed for motorized damper actuators which require the ability to sense the position of the motorized damper. This two-wire transducer can replace SSM10, SSM12, SSM13, and ANR60 transducers.

The 3439 Electropneumatic Transducer from Johnson Controls can be used to generate a proportional air signal. The transducer has a pneumatic input of 3-15 psi and comes with a 1/8" male pipe thread (1/8" NPT) for use with an air manifold. The passive element generates a varying resistance based on air pressure. This high volume transducer features an integral diaphragm switch and power indicator light.

The Johnson Controls 3443-501 Electro Pneumatic Transducer features a pressure range of 3 to 15 psi (197 to 1,034 kPa), and can handle up to 5 cubic feet per minute (0.144 m³/min). It has a signal port for installing accessories and also an integrated proximity sensor that allows for quick and easy setup.

The Johnson Controls 3439 ELECTRO PNEUMATIC TRANSDUCER is a pneumatic transducer is ideal for use in high volume systems such as HVAC and Air Cabin Pressure Control Systems, and the 3439 is the replacement model for the Johnson Controls 3374.

The 1117-3439 transmitter features a solid state design that provides increased accuracy and better, more responsive control of pneumatic equipment. An internal reference cell is used for altitude compensation. The transmitter is supplied with a high volume sensor with a maximum of 15 psi capacity and a 30-in. Hg full scale range.

When it comes to your indoor comfort system, you want to make sure you can always control the temperature quickly and conveniently. The Electropneumatic Transducer is compatible with select Johnson Controls LSX residential heating and cooling systems, LSX L-Series thermostats, and 250CCAC air conditioner condensing units.

The Johnson Controls 3439 Electropneumatic Transducer is a specially designed component that converts pressure into a proportional electrical output. The transducer is suitable for Johnson Controls' extensive line of commercial and industrial gas, water, and oil control systems.

User selectable Low, Medium, or High volume ranges Low voltage indicating up to 0-10 volts output ratio of 0-4:1

This pneumatic transducer converts the pressure of compressed gas to an electrical signal, which opens or closes the solenoid coil to operate most pneumatic valves. Built-in filter for protection against dirt and moisture.

The most accurate, consistent and responsive transducer on the market.