1/4"BARB X 1/4"COMPRESSION Johnson Controls F-200-33

1/4"BARB X 1/4"COMPRESSION

The F-200-33 1/4"BARB X 1/4"COMPRESSION has a standard 1/4"BARB X 1/4"COMPRESSION size, with a maximum working pressure of 100 psi at a 65 degree F temperature. It's connected to a copper pipe, and the end is straight tapered, which restricts the flow.

The 1/4"BARB X 1/4"COMPRESSION Johnson Controls F-200-33 Gas Regulator CBX3A is designed to function in applications along with burners with a commercial or industrial pressure necessities.

The Johnson Controls F-200-33 1/4"BARB X 1/4"COMPRESSION is designed for use in the HVAC industry. This compression connector is manufactured with brass for longer lasting durability.

When your space needs to be filled you can depend on the Johnson Controls F-200-33 1/4"Barb x 1/4"Compression reusable reducing tee. This is a quick and easy onsite solution that offers maximum operational flexibility while taking up little space in your drum or container. Ideal for use in wastewater, water, fuel oil, lube oil, and grease transfer systems.

Johnson Controls Climate Technologies F-200 1/4"Barb X 1/4"Compression adapter is designed to connect I-20 to a 1/4" pipe, creating a compression connection.

This F200 COMPRESSION INLET VALVE is a Johnson Controls own brand, and is a Compression Inlet With BARB X 1/4"COMPRESSION fitting. It is a Pressure Regulating, Air Inlet Valve, from Johnson Controls. This product is designed to control the intake of air from an outside compressor, and with the use of this F200 COMPRESSION INLET VALVE, Compression Inlet With BARB X 1/4"COMPRESSION you will be able to more effectively handle temperature and humidity changes while maintaining the temperature inside your heat pump or air conditioner at a

The F-200 33 gage with 1/4" barb x 1/4" compression is most commonly used with the following fuel lines: Nat. Gas, Propane, butanes. It is constructed of 100% copper tube with outside protective layers, flexible steel core with moisture barrier and exterior plastic cover.

With the F-200-33 barbed design, this compression fitting is rated within the ANSI standards and comes with a zinc-plated finish for long product life. The compression fitting is designed to use with copper and stainless steel tubing and comes in a brass finish. This fitting has a maximum pressure of 180 psi and can be used in residential and commercial/industrial water supply systems.

Compression fittings can be used in just about any type of recreational or industrial application.

Fully automatic self-regulating, precision compression system is easy to install, maintain and use. Ideal for refrigerant lines 0.25-inch nominal size, it incorporates a handwheel with a convenient pressure gauge and a built-in stop valve for quick bursts of pressurization. The F-200-33 model is designed to handle changes in elevation from 25 to 350 feer with ease.

The F-200 Series 33?X23? pressure controls regulate and modulate any type of gas with up to 3-way and 4-way (dual gas) setups. These controls feature two direct acting bar bend actuator that does not require a secondary actuator for operation. The controls contain the ability to set the differential pressure with a scroll type valve. The controls can be used as a primary regulator or secondary regulator in line with 3-way and 4-way (dual gas) setups.

A specialized coupler system that provides easy, fast and convenient latching and unlatching of 2 same-side tanks