FASCO D7749 Fasco- 1/4HP 208-230V 1075RPM 2Sp Mtr

1/4HP 208-230V 1075RPM 2Sp Mtr

Fasco 1/4HP 208-230V 1075RPM 2Sp Mtr FASCO D7749 is equipped with a highly durable cast iron frame that provides the necessary strength for heavy duty applications. This pump has a 4-lobe rotor that operates at 3,200 RPM and it is oil lubricated for longer life. The motor also includes breather caps and pressure relief valves to provide protection against excessive pressure build up. It has water pump adapters for ice makers, beverage dispensers, coffee machines, and other similar applications. The pump is protected by an ON/OFF switch and thermal overload protector

The Fasco D7749 is a 1/4HP 208-230V 1075RPM 2Sp Mtr with an adjustable thermostat.

FASCO D7749 Fasco- 1/4HP 208-230V 1075RPM 2Sp Mtr

The Fasco- 1/4HP 208-230V 1075RPM 2Sp Motor is a splined shaft induction motor. This motor has 1/4 HP, 110V, 1 Phase, 3400 RPM for use on 0.30 to 0.70 HP capacity equipment to move material and products through the manufacturing process.

FASCO's 1/4HP 208-230V 1075RPM 2SP Motor (D7749) is a two-speed motor that doesn't require a capacitor. The device utilizes a nylon impeller and brake to provide the most effective and efficient functioning. The D7749 model is designed for use in refrigeration applications such as ice cream freezers, refrigerators and more. This model has an efficiency of more than 80 percent, with an RPM of 1075 RPM. It is compatible with residential Wire 4-20 mA defrost controls and has a 0.37 horsepower abd voltage of 208

FASCO 208-230V 1/4HP 1075RPM 2Sp Mtr. The FASCO D7749 is the world's most popular brand of small motors. Small motors are designed to do the same jobs as large motors, at one-quarter the scale. They provide power for factory automation equipment, computers, printers, medical equipment and other digital devices.

This Fasco D7749 motor has a 12.5" frame and a 3.9 AICR . It draws 7.0 amps of current at full load and 11 amps of locked rotor current, with an open air circuit voltage of 230V. The iron cored inductive type is hard wired for single phase plus neutral operation rated for 208/230/460 volts AC 50/60Hz, with a rotation maximum of 1075 rpm. The motor is for light industrial machinery applications such as fan motors, pumps, mixers, blowers, or other non-corrosive environments subject to standard atmospheric conditions

This Fasco 208-230 Volt 1/4 Horse Power motor has a Full Load Amperage of 2.03. This Motor is 120 Volts and 60 Hertz.

The D7749 is a two speed, 208-230V, ½ horsepower, 110 V capacitor start induction motor for horizontal centrifugal pumps. Capacitor and thermal overload protection and 30:1 (NEMA 12) Nema 17 Severe Duty Blade and Shaft, plus a built in Speed Control Switch for faster control of pump performance - it all adds up to the most advanced pump on the world market today.

Built for a wide variety of applications, the Fasco D7749 is the perfect choice for the dedicated do-it-yourselfer. The heavy duty frame and 1/4 horsepower motor deliver power and durability at a value price.

An economical and compact shaded pole motor, 3-1/2 in extended shaft, with integral thermal overload protector and keyed connector mounted on the side of the overhung load center over the motor.

This motor is the world leader in the design, development and manufacture of Electric Motors. We produce more electrically operated motors of all types, sizes and horsepower ranges than any other company worldwide. Since 1885, our company has built its reputation on motor quality, innovation and customer service. Our line of heavy duty submersible pumps are designed for municipal wastewater treatment. The pumps are used to lift wastewater from collection systems into the treatment process.