Field Controls Product PVG-600 24V POWER VENTER FOR GAS 46245703

24V POWER VENTER FOR GAS 46245703

This venter regulates gas input to the main burner so the unit is fed the right amount of gas for consistent heating levels and less wasted fuel.  Field Controls Product PVG-600 24V POWER VENTER FOR GAS 46245703

The Field Controls Product PVG-600 24V Power Venter for Gas 46245703 is an essential part to the gas system in homes and other buildings. The venter takes care of the excess pressure trapped in the fuel tank but also makes sure that no unneeded pressure is lost to ensure for a good gas flow throughout the system.

The Empower 46245703 24V Power Vent is a poly isobutylene (PIB) power vent designed for use on gas-fired HVAC units that have not been converted to a thermostatically controlled blower.

Power Vent Pro 24V, 600 CFM, 7/8" Sweat, Gas Model.

The PowerVenter is a self-contained venting system that is designed to fit most gas grill models. Provides fresh air for the burner and flame safety control in accordance with applicable building regulations. The can be used both indoors and outdoors. The venter design allows for burner flame adjustment control up to 20? above the cooking surface (when coupled with GrillMate), the ability to accept natural gas or propane, and multiple mounting options for multi-burner models.

The POWER VENTER PVG-600 is a commercial quality vent with internal heat switches that sense flame failure and auto cycles to operate auxiliary burners safely, using only the outside air necessary to burn off propane vapors from storage tanks. It can be direct wired to a pair of gas burners or an ignition module (AIM-600 or MVG-1). Thermocouples, available separately, assure greater safety. When used on 480 VAC circuit, field supplied convertible line cord must be ordered separately. The POWER VENTER PVG-600 must be installed by a qualified professional technician.

The PowerVenter PVG from Field Controls opens up your world to a new level of venter control. This innovative, new generation of unvented gas fireplaces uses patented technology to provide automatic stack control and VAV system switching capabilities via its built-in interface.