Fireye M4RT1 FlameRectCtrl 120v5secP.10PTFI

FlameRectCtrl 120v5secP.10PTFI

DUO-THERM. Fireye M4RT1 Flame Rectifier in 120/240 Vac 5 sec P. 10 PTFI mounting bracket is ideal for fire and gas detection systems requiring a flame rectifier. The flame rectifier maintains three-phase power operation to downstream monitors even when downstream flame detectors are deenergized or in the failure position.

Fireye M4RT1 Flame Rectangular Control - 120 volt - 5 second, 10 PSI (Fireye Part # M4RT1)

The M4RT1 Fireye flame rectifier removes overheat, radio frequency, or voltage transients from 120V AC power lines. With an auto reset, this fireye unit has two 5 second high frequency protection circuits and one 10 second pulse transient protection circuit. The M4RT1 is fully enclosed in a polycarbonate case, has two keyholes on the top of the case for easy wall mounting, and comes with quick-disconnects for easy wiring.

Fireye Products M4RT1 Flame Rectangular Controller

The Fireye™ Multi-Purpose Flame Rectification Controller is designed to control a variety of sub-ambient burner flame temperatures and to characterizes various burner flame parameters such as stability, initial ignition, heatup time, extinction and flame recovery.

The FLRC4-P10 Fireye module is a flame rectifier and damper that mounts in panels up to 71/2" (1.8 cm) thick through a 4" (10.16 cm) Duct Opening, incorporating low profile mounting hardware. It is designed as an externally adjustable gas neutralizing and monitoring device that allows for the installation of fire protection systems.

The Fireye® M4RT-1 is a flame rectification control unit that provides accurate flame detection. It is also known as a flame mount detector. Located near a burning gas appliance, the M4RT-1 detects flames of up to 20 inches (50.8cm) in height and forwards this information to building controls or similar devices via two TTL outputs.

FlameRectCtrl 120v5secP.10PTFI

DUO-THERM. Fireye M4RT1 Flame Rectifier in 120/240 Vac 5 sec P. 10 PTFI mounting bracket is ideal for fire and gas detection systems requiring a flame rectifier. The flame rectifier maintains three-phase power operation to downstream monitors even when downstream flame detectors are deenergized or in the failure position.

Fireye M4RT1 Flame Rectangular Control - 120 volt - 5 second, 10 PSI (Fireye Part # M4RT1)

The M4RT1 Fireye flame rectifier removes overheat, radio frequency, or voltage transients from 120V AC power lines. With an auto reset, this fireye unit has two 5 second high frequency protection circuits and one 10 second pulse transient protection circuit. The M4RT1 is fully enclosed in a polycarbonate case, has two keyholes on the top of the case for easy wall mounting, and comes with quick-disconnects for easy wiring.

Fireye Products M4RT1 Flame Rectangular Controller

The Fireye™ Multi-Purpose Flame Rectification Controller is designed to control a variety of sub-ambient burner flame temperatures and to characterizes various burner flame parameters such as stability, initial ignition, heatup time, extinction and flame recovery.

The FLRC4-P10 Fireye module is a flame rectifier and damper that mounts in panels up to 71/2" (1.8 cm) thick through a 4" (10.16 cm) Duct Opening, incorporating low profile mounting hardware. It is designed as an externally adjustable gas neutralizing and monitoring device that allows for the installation of fire protection systems.

The Fireye® M4RT-1 is a flame rectification control unit that provides accurate flame detection. It is also known as a flame mount detector. Located near a burning gas appliance, the M4RT-1 detects flames of up to 20 inches (50.8cm) in height and forwards this information to building controls or similar devices via two TTL outputs.