FLAME SWITCH for Vulcan - Part# 00-913145-00002

FLAME SWITCH for Vulcan - Part# 00-913145-00002

The Flame Switch Part Number 00-913145-00002 for Vulcan Models: EH500, EH600, EH650, EH680, EH700,EH750, and EW635 replaces the switch that is installed on these models. The Flame Switch will fit the same knockout dimensions as the original - Up to 1/2" (12 mm) deep by 3" (76 mm) wide. The valve stem is 3/8"-24 NCS by 11/4" long (without keyway).

FLAME SWITCH for Vulcan - Part

The Flame Switch for Vulcan models ignites the burners for a natural gas fired grill with a push of a button. This switch is located in the body of the grill adjacent to the propane tank and requires no additional wiring when installed. The separate control switch under the lid of the grill must be turned on (positioned to the left) in order for the flame controls to ignite.

A Flame Switch (8122-00-910-5114) is designed to work with Vulcan Gas Torch Models WAR08/PLAN99, ED500, and EDL500. It is used on the torch head and the flame control valve. The Flame Switch is a safety component that must be in good order for the torch to start and continue to operate safely.

This flame switch is a replacement part for the Entec Vulcan gas fireplaces MODEL NUMBER: PFZG3330 and FLAME SWITCH FITS PART

The Flame Switch is a push-button ignition replacement on a 2000 to present Vulcan Classic or Classic LT models that have had the 20th Anniversary upgrades.

The Flame sensor provides precision control to the Vulcan E-series stove. The flame sensor monitors the heat levels of the grill and can be set to High, Low, or off to maintain precise control over your cooking temperature. The flexible sensing probe allows for accurate readings, while its convenient position above the burners makes it easy to view from anywhere in the kitchen.