MCDONNELL & MILLER 112770 120610 - SPDT 1" NPT. GENERAL PURPOSE NEMA-4 FLOW SWITCH,

SPDT 1" NPT. GENERAL PURPOSE NEMA-4

The SPDT 1" NPT. GENERAL PURPOSE NEMA-4, from the Switch Pack (SPA) series, is designed to control electrical equipment according to various industrial applications. In addition, this switch has an aluminum casing and a steel base that are able to withstand tough conditions. This device is also equipped with a dampened operating lever and supports high industrial voltage of 600 V AC or 600 V DC. ********************************************** The internal parts of this switch are lubricated for life and require no

The SPDT 1" NPT. General Purpose NEMA-4 Flow Switch is well suited for applications where the status of a fluid is required, initiated by the presence or absence of liquid in a single stream. The switch features a double pull design that prevents inadvertent activation, making it ideally suited to control reliably and safely.

GENERAL PURPOSE NEMA-4 FLOW SWITCH *** SPDT 1” NPT. GENERAL PURPOSE NEMA-4 FLOW SWITCH. UPC: 034822361084

Our General Purpose NEMA-4, Size #6 pressure switches are used anywhere a high-temperature, high-pressure switch or indicator is required, including industrial heating applications and steam generation. The SPDT 1" NPT is a high temperature 125 PSI electromagnetic switch that will not operate unless the handle is straight up.

A 1" (nominal) spud inlet with adjustable flow rate, connections to NEMA - 6, 4 and 4X enclosures. Meets NEMA-4X enclosure for hazardous locations. The 120610 SPDT switch is housed in a cast aluminum NEMA-4X enclosure that utilizes two 3/8" nylon bushings as rocker arm bearings. This switch can be panel mounted vertically or horizontally and has a 10 ft. long guarded cable with a 1/4

Designed to switch on devices with flow rates above 0.5 gpm, the SPDT 120610 is ideal for controlling showers, washing machines, or any other device that requires a low water flow. The terminal strip makes wiring quick and easy.

The 112770 and 120610 are NEMA-4 rated and retain IP66 when installed in a suitable enclosure to prevent external spray water ingression (IP66 as the boot) for outdoor use. The NTEP Class III certification can be supplied if requested. The switches operate on 85 - 250 Vac or Vdc electrical power and can withstand voltages up to 600 V with short-circuit and surge currents of 6,000 Amps. An upper power rating of 5KW will accommodate