Functional Devices PSH300A-LVC | FDI | Enclosed low voltage compartment 100VAx3 120-480 to 24Vac UL Class 2 power supp

100VAx3 120-480-24V power supp

The FDI PSH300A-LVC is a control center housed inside an enclosure. It includes a 100VA, 120-480 volt input x 3 phase output product. This power supply also offers UL listing and CE marking. The FDI PSH300A-LVC Power Supply will convert up to three grounded AC inputs from 120 to 480 volts into 24 volt DC outputs. Each output can be individually isolated for field installation.

The Functional Devices PSH300A-LVC is a common enclosure Power Supplies with an Enclosed Low Voltage Compartment (100VA@120-480Vac) UL Recognized, Class 2 power supp. The Functional Devices PSH300A-LVC is rack mountable and can be mounted on a 19? wide Independent Rack. It has 120V input and 24VDC output power/current. This Power Supplies will support up to three low voltage modules come in different configurations according to model.

The FDI 100VA (x3) is a self-contained, sealed, low voltage power supply for use with electronic devices in hazardous locations. The unit is housed in a fire-retardant ABS enclosure with a sealed MPP and low voltage switch controls that are recessed out of harm's way. The FDI series units switch at approximately 50mA (.05A) and feature either solid state on/off switches or rotary knife switches.

This power supply is designed for use with FDI's range of smart home and building automation products, modules and devices. It features 3 independent channels, each capable of delivering up to 100VA. Each channel is further selectable to support either 120 or 240VAC operation at any output voltage in the range 24 to 48VDC. The low voltage compartment incorporates a full range line-to-line 4ms RMS surge protection and 180mR 360Hz power loop interference suppression on each channel of the unit.

The PSH300A-LVC configures the power supply into 3 independent 100 VA power sources, for each output with 1.5 kV isolation design. The provision of three independent switching outputs plus 1 earth leakage output makes it convenient to convert the single phase 220vac/240vac input to three or four isolated outputs and one earth leakage output using MR power cord.

Power supply with high efficiency, enclosure design, low noise fan, auto voltage adjustment. Low voltage compartment (LVC) protection with 0.6uF ceramic capacitor & DIP switch for output power selection 24Vac or 120~124V. Output indicator LED for adjustable output voltage, UL Class 2.

The PSH300A-LVC have 3 independent enclosed low voltage is ideal for powering X10 compliant devices and meeting strict UL guidelines. The primary differnce between the 300 series and the 500 series PSUs is the longer cord.