208-277VAC DPDT RELAY
The RIB02P is a 208-277VAC 20A DPDT relay designed for use as a universal light or power source. Optional diode kits are available.
The RIB02P is a 20 amp DPDT relay that uses AC power to switch two separate AC loads on or off, 10 Amp per contact.
The FE-RIB02P relay is a DPDT, 20 Amp (Max for 24VDC coil voltage), Low Voltage device enclosed in a panel mount PCB. The coil windings are isolated from the contacts and the control input via low voltage control relay driver). The product is UL Listed, CSA Certified NO # E797101-1 and RoHS Compliant.
The RIB02P is a solid state, SPDT relay. This unit includes 2 SPDT contacts rated @ 20 amps DC and has a no break AC coil voltage of 208~277VAC @ 50/60Hz. The RIB02P has an input impedance of 10K ohm DC and offers a switching current of 0.5A@250VAC and 1A@120VAC (Release coil power is less than 1Watt). This relay is not UL documented and is humidity resistance.
Our enclosed DPDT relay is designed for applications requiring a high level of environmental or physical protection. This relay's enclosed case features a locking relay cover, and conforms to NEMA standards.
The RIB02P is a 20 amp DPDT (Double Pole Double Throw) relay enclosed in a plastic housing. The relay features one normally open and one normally closed contact. It has 4 pins, 2 for coil connection and 2 for load connection. The packaging options include tape & reel or tray packaging.
The RIB02P is a low cost, fully sealed, single pole, normally open 20 Amp Relay Module designed for use in the Function Devices brand enclosures. The relay is rated for 20 Amps at 480 VDC, and has a coil voltage of 96 volts. It contains six screw terminals on the front of the relay module (L1-2-3-4-5-6).
Free Shipping
In stock
