Functional Devices RIBMNLB-4 NO | FDI | Panel RIB logic board, 4 Normally Open inputs, 2.75in

RIB Logic Brd TrackMnt 4 inpts

The 4-Inpt TrackMnt is a remote input module that allows you to control any input device, including our FDI series of HVAC and fire alarm occupancy sensors, from your PC. The RIB Logic Brd Access can interface and operate all FDI devices via RS-232 serial connection.

Enjoy effortless control over your cabin lighting with the RIB Logic Brd + 4 normally open inputs. Each input comes with an integrated 10 amp resettable breaker in case of a short event, and you can switch each input independently for a variety of control options.

The RIB Logic Board is a brilliant new way to Open, Close or monitor switches from RFID, Magnetic or Infrared field changes.

NEC Display Solutions of America introduces the new 4" RIB logic board to the market. This versatile "Controller On A Board" provides an easy programming interface for digital input and output control of popular brand variable message signs (VMS) and scrolling displays.

The Easy-Set RIB Logic Board monitors 4 separate “open” devices. As long as the device connected to IN 1 is “open”, the logic board will be triggered to send low (+12VDC) to IN 2. When IN 1 is closed, OUT 1 will provide a +24VDC output. If any other of the connected devices are open, then the logic board will be triggered to send out a low (+12VDC) on OUT 2. The additional circuitry contained in this controller makes it a versatile programmable controller that can perform many different functions and monitoring applications. Hand

These are the same electronics that go into every RIBMARK Module, housed in a thin metal enclosure with four mounting holes. The RIB Logic Board allows you to build your own control panels for use with our Spot Marker Lights or Ribbon Strips.

The RIB MN-4 no/fdi provides 4 normally open intelligence inputs for use with the TRC-2000, FlexTrack and FlexDisplay as well as up to 8 IMNIDEC devices. The RIB logic board may be used in conjunction with the TRC-2000 or FlexTrack transmitter to independently control each input by means of a LOGIC1 command. When supplied with 24vdc power, the RIB MN-4 no/fdi may be used to switch track power and fault currents to minimize amperage draw from a transformer. A status LED indicates when the unit is active.

RIB Logic Brd TrackMnt 4 inpts

The 4-Inpt TrackMnt is a remote input module that allows you to control any input device, including our FDI series of HVAC and fire alarm occupancy sensors, from your PC. The RIB Logic Brd Access can interface and operate all FDI devices via RS-232 serial connection.

Enjoy effortless control over your cabin lighting with the RIB Logic Brd + 4 normally open inputs. Each input comes with an integrated 10 amp resettable breaker in case of a short event, and you can switch each input independently for a variety of control options.

The RIB Logic Board is a brilliant new way to Open, Close or monitor switches from RFID, Magnetic or Infrared field changes.

NEC Display Solutions of America introduces the new 4" RIB logic board to the market. This versatile "Controller On A Board" provides an easy programming interface for digital input and output control of popular brand variable message signs (VMS) and scrolling displays.

The Easy-Set RIB Logic Board monitors 4 separate “open” devices. As long as the device connected to IN 1 is “open”, the logic board will be triggered to send low (+12VDC) to IN 2. When IN 1 is closed, OUT 1 will provide a +24VDC output. If any other of the connected devices are open, then the logic board will be triggered to send out a low (+12VDC) on OUT 2. The additional circuitry contained in this controller makes it a versatile programmable controller that can perform many different functions and monitoring applications. Hand

These are the same electronics that go into every RIBMARK Module, housed in a thin metal enclosure with four mounting holes. The RIB Logic Board allows you to build your own control panels for use with our Spot Marker Lights or Ribbon Strips.

The RIB MN-4 no/fdi provides 4 normally open intelligence inputs for use with the TRC-2000, FlexTrack and FlexDisplay as well as up to 8 IMNIDEC devices. The RIB logic board may be used in conjunction with the TRC-2000 or FlexTrack transmitter to independently control each input by means of a LOGIC1 command. When supplied with 24vdc power, the RIB MN-4 no/fdi may be used to switch track power and fault currents to minimize amperage draw from a transformer. A status LED indicates when the unit is active.