Functional Devices RIBU1C Enclosed Pilot Relay, 10 Amp Spdt with 10-30 Vac/Dc/120 Vac Coil

10-30VAC/DC

This 10 Amp pilot relay works with 10 to 30 volt AC/DC systems. It has a single pole, double throw (SPDT) switch with 10-30VAC/DC sensitivity.

The RIBU1C pilot relay utilizes a solid state hermetically sealed switch which includes an internal Platinum contact to prevent arcing and wear. This enclosed pilot relay is waterproof, suitable for potable water applications and is available with 10-30 Vac/DC coils that have internal generators. The RIBU1C series also comes standard with gold plated sockets to prevent corrosion and is suitable for harsh environments including salt water and well as soil.

The RIBU1C is an enclosed 10-amp SPDT pilot relay with 10-30 volt AC/DC and 120 volt coil terminals. The unit's terminal cover provides protection against contact with line voltages and is marked to show that the power-in (hot) terminal is on the right (as viewed from the rear of the body).

The RIBU1C is Pilot relay with enclosure 2-wire SPDT, coil voltages 10-30VDC/AC. Use the RIBU1C Relay to energize or de-energize pump motors, blowers, relays, solenoids and much more. The enclosed design of the RIBU1C allows for protection of circuits it actuates. The RIBU1C comes in 1.5 and 3 amp versions as well offering DC control for 0-30V output voltage and AC control for 0-600V output voltage.

The RIBI1C is a 1.5" x 1.25" (3.81 cm x 3.18 cm) pilot relay enclosure designed for mounting on an instrument panel or relay rack. The pilot relay houses an NTC thermistor (power sensing element) and a 10A/250VAC/VDC spdt Normally Open relay with permanent magnets. The enclosure has a black polycarbonate cover with tapped 6-32 holes to accept a screw adapter which secures the coil & element in place, or it can be used separately to seal the enclosure from contaminants.

Easy-to-crimp field replaceable wire leads are factory assembled to terminal block

The RIBU1C Pilot Relay turns on and off a 120/240-VAC circuit. The relay contacts are rated for 10A AC or DC, and it has a coil rating of 3.5 VA. It is enclosed in nylon resin material and includes mounting holes for easy installation.