FRYMASTER F10110 810-2098 810-2098 DEAN 8 GPM PUMP (810-2098)

Gear Pump 8GPM

A compact, fully-enclosed gear pump that is specifically designed for mobile food units to provide rapid and consistent water flow. Ideal for quickly re-hydrating a basket of fries or soaking a tray of wings. Pump Flow @ 3.5 PSI = 8GPM (28Lpm); Pump Head Diameter = 1.38" (35mm).

This product is a gear pump that is designed to fit the frymaster 810-2098 810-2098 Dean 8 GPM pump. This product helps transfer the oil and grease from its original location to a remote waste location.

Designed with a vertical pump that angles downward, grease will flow down and away from the gears creating less friction and therefore less heat. The eight gear pump also has built in multi-stage pressure relief valves to protect your fryer against damaging high pressures.

The 810-2098 Gear Pump is ideal for fryers, griddles, woks, hot liquids, steam vegetables and more!

The Fry Master 810-2098 pump is a Gear Pump which is used to ensure heat transfer when using the Dehydrator Kit. This pump operates at up to 1250 RPM and has an internal self-lubricating ball and cage thrust bearing with grease fitting. The pump housing material is carbon steel with a baked epoxy finish that has internal seals for each inlet and outlet. This gear pump's impeller shaft is made of steel and the impeller's blades are brass. The 810-2098 also known as part number 820-106, 821-106, 820-112, 820-

Gear pump with reduction drive for domestic hot water circulating systems. The pump may be installed horizontally or vertically, and includes an integral check valve. Suitable for use in potable water applications. For best results use with an accumulator tank.

The F 10110 was designed to control temperature tolerance to prevent freeze-ups of liquids in excess of -40°F (-40°C), and flow rates from 1 GPM (3.8 litres) to 10 GPM (37.8 litres). All flow and pump rate capabilities are shown on the pump's meter.  The F 10110 is a gear pump that has a black finish and is constructed with cast iron or stainless steel gears depending on specific model selected.