Apex KD80751 Jacobs Chuck 0080750 CAT V 50 ER 50 Tool Holder with 4-Inch Projection

1/2 Drive 12 pt. StandardSocket 16mm

The Apex KD80751 is one of the many tools that Eagle Tools carries

It may then be removed from the lathe and used in a drill press or other power source

The Apex KD80751 Jacobs Chuck 0080750 CAT V 50 ER 50 Tool Holder with 4-Inch Projection is made of C360 Brass

The Apex Jacobs Chuck is an economically priced Jacobs chuck for use where the back-up of a tailstock is not required or where tailstock space is limited

The tool holder is made of a solid steel construction and has a black oxide finish

The chuck body is made of steel and has a Chrome Plated finish while the screws are made of heat treated alloy steel with a Black Oxide finish

The Apex KD80751 is perfect for light duty jobs

The chuck may be disengaged from the work by pushing a lever on the left end of the shank

Our mission is to provide only the finest tools and accessories to our customers, with exceptional service

The Apex 1/2 in

It will hold a CAT number V50 ER50, this does not include the bit or the wrench it will hold both of them though so if you have lost your 1/2 drive 12 pt

For more than four decades, Eagle Tool has been a leading provider of premium quality hand tools to the construction and manufacturing industries

This is from Eagle Tool a Division of Lincoln Industrial Tools

5 Thread for use with electric drills

It has a 3/4" diameter x 2" length keyway for easy installation of bolts, screws and keys

The thread size is 16 mm and it has an outside diameter of 10mm

The Apex KD80751 Jacobs Chuck 0080750 CAT V 50 ER 50 Tool Holder with 4-Inch Projection is the standard size

projection from the shank, also allowing it to be used as an extension bit holder

The shank length is designed to have four inches of projection with the chuck body mounted directly on the tool spindle nose

It has an 11mm square socket (9mm deep) and an 18mm x 1

It has a 1/2 inch square drive and features a standard socket

It is designed to fit the CAT V 50 ER 50 machine tool

The 11/16" diameter guide rod for high strength, maximum capacity and durability

It has a self centering feature which ensures no slippage or torque loss

56" Standard Jacobs keyway and accepts 1/2" square drive tools up to 12 point

The chuck can be used in applications where high accuracy and repeatability are needed

It's made of heat treated steel for long wear life

of length and a 4-in

Standard Socket 16mm Tool Holder is the perfect solution for your tool storage needs

It has a 16mm keyway and a 50mm shank length

Part No: KD80751

The Apex Tool Holder is used with power tools that operate at speeds of up to 10,000 RPM and can hold round stock, square stock or flat stock

The Apex KD80751 is a standard size 1/2" drive Jacobs Chuck for use in CAT V50, CAT ER50 and Jacobs chuck equipped tools

It features 14mm/0

Drive 12 pt

They provide virtually vibration free operation and are self centring making them easy to install and remove from your power tools

Plus, this tool holder features a lifetime warranty to ensure long-lasting use!

StandardSocket, 16mm, and a 4-Inch Projection

This is the tool holder for a 1/2 drive 12 point standard socket 16 mm

The KD80751 features a 1/2 drive 12 pt

This is an Eagle Tools Apex Jacobs Chuck 0080750 CAT V 50 ER 50 Tool Holder with 4-Inch Projection

The Apex KD80751 Jacobs Chuck 0080750 CAT V 50 ER 50 Tool Holder with 4-Inch Projection is the best there is on the market and it's very affordable

The Apex KD80751 Jacobs Chuck 0080750 CAT V 50 ER 50 Tool Holder with 4-Inch Projection allows you to hold your 1/2-Drive 12-Point Standard Socket into a 4-Inch Projection

The tool holder fits 3/4 Inch Drive Standard Sockets (12-pt) and has an 18mm square socket (12mm deep)

It has a total of 1-7/16 in