GENERAC 0H33750168 - COIL ASSY.: IGNITION -

COIL ASSY., IGN

GENERAC 0H333-50168 *** COIL ASSY., IGNITION *** GENERAC LOGO. NSN: 4680-01-469-7926 ***

GENERAC 0H33750168 - COIL ASSY.: IGNITION - ** GENERAC 0H33750168 -- Coils, Ign SPARKPLUGS, and Spark Plug Wire Sets: REPLACEMENT WARNING: This part contains a gas under pressure. Improper use of this part or failure to follow installation instructions may result in serious personal injury and/or property damage. Do not at any time let anyone other than a qualified technician install this part. Failure to

GENERAC: 0H33750168 - COIL ASSY.: IGNITION *** Generac offers a wide range of home standby generators, ranging from 1,750-18,500 Watts and 120V/240V. These generators are designed to help protect and maintain your peace of mind when an outage occurs, powering essential...

GENERAC 0H33750168 - COIL ASSY.: IGNITION Fuel/Oil Filter Part #: GENERAC 0H33750168 The Ignition Coil is used on Generators that have an Electronic Ignition System.

The GENERAC 0H33750168 - COIL ASSY. ign switch assembly is easy to install and provide reliable performance in all types of weather. Passes the rigorous induction voltage and thermal performance testing requirement of CALIFORNIA EMISSION C.A.R.B.. Features: Each Ignition Coil Assembly 12/24 volt DC consists of a coil, primary wire harness, secondary wire harness, secondary pulley and mounting hardware. Grounding lug and cable insulators are normally

Ignition coil assembly. If the basic engine functions are not working, replace the coil assembly (Genuine Generac replacement part).

This Ignition coil features a 3 wire design which allows it to be used on 120 or 240 volt outlet. It has 2 mounting holes that are 0.5" and 1.125" from the pivot bolt hole center. The coil is rated for a maximum input of 30 amps at 120 volts and 45 amps at 240 volts. The control box terminal screws provide 720 to 450 ohms contact resistance and 12.5k to 22.2k voltage with 63 amps input current flow, which is required