General Electric 421167 TOGGLE SWITCH;1/2 DPST

TOGGLE SWITCH;1/2 DPST

General Electric Toggle Switch 1/2 DPST

The Toggle Switch has a Contacts rating of 10 Amps at 110 VAC and 10 Amps at 250 VAC, and a Power rating of 50 Watts at 110 VAC and 250 VAC. It has a 2 post configuration, and it has 0.25 in terminals. It has Ratings: 110/250VAC...65 AMPS...10/2CUBIC INCHES/MINUTE and it comes with a mounting hole."

Sometimes, the simplest solutions are the best. That's why the 421167 is here to give you on/off versatility. This low-voltage toggle switch is designed especially for GFCI applications, but it's also great for locations that need a single pole/double throw (SPDT) switch.

General Electric Toggle Switch

The toggle switch is designed to work in well-ventilated areas. The General Electric 421167 toggle switch is rated for 120/277 VAC, 15/30/60 cycles, 60 Hz with a vacuum contact rating of 40 Amps at 600 volts. The non-on rocker has 0.5 throw with an actuating length of 0.43 inch maximum throw The General Electric toggle switch uses brass terminals which are connected via push-in quick connects. The voltage rating of the terminal is rated at 10 Amps at 125 volts for direct current connections and 10 Amps at 277 volts for alternating current connections.

This rotary-action, mechanical-latching toggle switch controls power to a load in one position and in the other. It has a 12 in. (305 mm) long, 3/4 in. (19 mm) diameter cylindrical shaft with a center off position and a smooth bore, normally closed blade contacts in captured aluminum alloy housings, with a rated current of 5 A at 125 VAC, 60 Hz and 0.37 A at 250 VAC, 50 Hz.

This is a new in the box, General Electric 421167 toggle switch. This is one of the best switches you can get for your power tools. And, it's nice to have extra ones around the shop because no one wants to be looking for a switch when they are ready to use their saw.

The GE 421167 Toggle Switch is suitable for any household application.

Switches, Lighted Toggle Switches

Plug this toggl eswitch into any outlet, then connect it with your home's wiring for instant lighting control. Turn the lights on or off with the touch of a finger. No need to fumble around in the dark looking for a wall switch to turn on the overhead light.

The switch can be activated at the moment of starting or stopping motor rotation and make it convenient to operate. For instance, the switch is widely used for smooth start and stop of motor used in: lathe, drill, boring machine and other power tools.