Glynn Johnson 454S652 OH.10423 454S 652 Surface Overhead Stop

GLY 454S 652 SURFACE OVERHEAD STOP

GLY 454S 652 SURFACE OVERHEAD STOP; Lockable Stop; With Key; Without Lift-Up Handle; 2.75" x 4.65"

"The Glynn Johnson 454S 652 OH. 10423 Surface Overhead Stop is designed to hold surface mounted rolling stock at the correct height above the top of the rail when stored overhead.

Glynn Johnson takes its name from an engineer behind one of the landmark aviation inventions of the 1960s, the air-bearing landing system. It is fitting that this brand strives to save passengers around the world from long queues and generally poor treatment during travel. The 454S 652 Surface Overhead Stop is a gate seal intended for use on an airport surface vehicular glide path or stopway, specifically designed for moving walkways, stair ramps, escalators, and passenger conveyors. It prevents water intrusion by recess mounting with its drip edge to protect against rain run-off.

Glynn-Johnson's 454S 652 is designed specifically for use with the 455 Series of Surface Overhead Stops (all with 4-3/8 inch release elements). This molded plastic combination stop is non-conductive and has an adjustable mounting base for easy field installation.

The Glynn Johnson 454S652 OH.10423 454S 652 Surface Overhead Stop is made of aluminum and has a black powder coat finish. It includes 15/32 x 15/32 mounting holes and features a load rating of 740 lbs.

A 454S 652 Surface Overhead Stop designed option option to allow alternative ceiling structures, this is more of a reflective part of the OEM version of the 454S 652. This product fits the purpose built surface/ceiling structures of the trucking industry standard. It is an alternative of standard stop fixture for cab structure trailers. Fits with Sealed beam type or Reflective optional bulbs.

The 454S 652 Surface Overhead Stop is a direct replacement for the 454S-543 and 454S-549 Surface Overhead Stops.

The Johnson 454S652 OH.10423 454S 652 Surface Overhead Stop is a horizontal surface mounted stop, the bar is rigidly fixed above the door to prevent it from being opened past a predetermined point. This overhead stop comes complete with stainless steel hardware and a serviceable nylon pin.

Glynn Johnson Surface Stop -- 454S 652 -- Surface Mounted Stop with 1" X 3/8" Top Plate and Bottom Plate, Grade 316 Stainless Steel, Beveled Edge, Plastic Cover, White Enamel

This 24 Volt Surface Overhead Stop is designed for DC Motors with 24 Volt DC Solid State Resistor Rated Motor current of 4.2 Amps or less, 0.500 Watt or less. The Overhead Stop operates between 115 VAC to 127 VAC supply voltage. The Overhead Stop has a White, Polyester Powder Coated Enclosure, Operating Temperature range -25ºC to +55ºC.

This overhead stop has a die cast zinc alloy body painted in red bronze. It is designed to be mounted on the surface of shop equipment. The stop is mounted using machine bolts through the knock out holes provided in the flanges. This product must be installed only by qualified personnel with proper tools.