Grundfos 52722513 UPS26-99FC 230V CI

UPS26-99FC 230V CI

The 52722513 UPS26-99FC 230V CI  is a water pump that are easy to install and has a long life due to the patented impeller design. This is a powerful pump and is suitable for many different applications. It comes with an array of features including the following:

Grundfos 52722513 UPS26-99FC 230V CI  is an Industrial-quality pump built to withstand continuous duty cycles with proven technology. It contains a fully welded cast iron body with manual reset thermal overload protection for safe continuous use even during power failures. The magnetically coupled impeller/impeller cage assembly provides 2-stage filtration ensuring water purity. It has a ceramic volute assembly and ceramic shaft, with base and casing plated in nickel and gold, making it capable of handling high temperatures...

When your workplace needs a compact and quiet solution, check out the UPS26-99FC 230V CI pump from Grundfos. Although it has a compact size, this unit is able to deliver up to 2800 W of power and 30 L/min or 190 m³/h of flow rate. This makes the UPS26-99FC ideal for applications such as cooling towers, small workshops, laboratories and commercial beverage equipment.

The UPS26-99FC 230V CI heat pump combines high COP with free and flexible positioning, making it the perfect choice to provide a sustainable source of heating and cooling. The UPS26-99FC 230V CI heat pump is for applications demanding a new level of efficiency and flexibility, such as in warehouses and workshops with changing requirements throughout the year. Power demand can be met on site using an optional battery pack. The UPS26-99FC 230V CI heat pump allows for energy recovery, where the waste heat from the condenser water can be utilised in district heating systems or other hot water applications.

The UPS 26-99FC 230V CI is a compact, built-in submersible pump water driven by an AC motor. It uses a single phase 230V power supply and features an integrated momentary contact output for switching two loads in AC pump control circuits which require minimum power level.

With a quiet and compact design, the UPS 26-99FC 230V CI pump has a maximum flow and lifting capacity of 16.6 l/min (4,000 gal/h) at 2.5 m head (8 ft), making it suitable for a wide range of applications where flow rates up to 8 gpm are required. The unit is also designed with an alarm inbuilt to alert the user if the discharge pressure falls below set parameters, helping ensure longer pump life and protecting installed systems from damage due to cavitation.

The UPS26-99FC is a single cable system for connection to a 230V 32A or 24A breaker. The 52722513 UPS26-99FC is ETL listed to UL489 standards for plumbing equipment and installation.