Carrier 298194 HC40GE228 1/4hp825rpm208/230/1/60 CW MTR

1/4hp825rpm208/230/1/60 CW MTR

The Carrier 298194 HC40GE228 1/4hp825rpm208/230/1/60 CW MTR recovers normal condenser water from the air. The Carrier 298194 HC40GE228 1/4hp825rpm208/230/1/60 CW MTR has a low pressure switch and is direct driven, meaning there is no motor starter or capacitor.

A 1/4 HP 208-230/1/60 Continuous Duty Motor, Belt Driven, Totally Enclosed Non Vented, Refrigeration Compressor; Housed in Gray Cast Aluminum Cabinet with Stainless Steel Drain Pan. AMPS: 1.25; Volts: 208-230/1 HZ; Output Watts: 825; RPM: 825

The Carrier 298194 High Capacity 40K BTU 208/230/1/60 Continuous-Watt Electric Unit Heater has a narrow cabinet design to allow easy installation in tight spaces.

Nema rated enclosure, water cooled / Includes; pedestal, (2) 15 amp breakers, 208/230/460 volt, full-magnetic motor starting cap., 208/230/1 phase power supply. Basic rolling carts include a 15 amp 125 VAC, 1 ph. circuit breaker on disconnecting base and double-throw manual reset at motor.

With 1/4 horsepower, this Carrier brand air conditioner is the perfect energy efficient solution to home cooling. It includes a 208/230 volt motor, 2450/2700/3000/3500.

Need to replace that old piece of machinery in your facility? Well look no further! The Carrier HC40 series can be used in both 26.5" and 24" door configurations. These units feature a 30 HR/min internal centrifugal blower, external static ports, and are tripped by a single or dual T-stat. This unit has a 208/230 1ph 60Hz, Zero-LEL combustion with steel flame shutter, double insulated panel heaters, or optional electric heaters. A 2 speed condenser fan motor is available at extra cost.

The Carrier HC40/HC45 Series heater is a single stage, low voltage, 208-230 volt, 1 phase and manufactured to the CSA and ANSI Standard. It is suitable for indoor use on small residential or confined areas such as walk-in closets. The unit consists of a powerful blower/motor assembly with thermal overload protection, a durable direct spark ignition system and a heat exchanger. The unit is designed for ease of installation and maintenance.