OTC
OTC OTC-6478 Cam Gear Holding Tool for Ford
Cam Gear Holding ToolIt is a kit of basic toolsOur Bosch BASIC Software Update Kit provides the latest software for your OTC BOSCH automotive service toolThe OTC software update kit provides a...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountCam Holding Tool Adapter
No more fighting with your cam tool to keep that pesky cam straight while you dial in its settings!
This adapter pins into the cam body and clamps onto a hex-shaped tool shaft
OTC’s Cam Holding Tool Adapter is the perfect solution for holding cams in alignment during installation
The OTC Tools Cam Holding Tool Adapter allows tools with a 1/4" hex shank to be used for holding cams on drawbars in place
This simple adapter allows the OTC-6480 Cam Holding Tool to hold camshafts that have small diameter cam followers and require a socket style holding tool
drill chuck and is compatible with other tool brands that use a standard 3/8 in
It features an adjustable shoulder to accommodate various sized cams and an integral locking screw for added security and reliability
The Cam Holding Tool Adapter is compatible with the OTC-6000, OTC-6010, OTC-6020, OTC-6030 and OTC-6040 Cam Holding Tools
The adapter mounts to any 1/4 in
OTC’s versatile Cam Holding Tool Adapter allows you to use the same OTC holding tools on either a tapered or straight cam
81” (97mm) maximum ID and 7/16” (11mm) minimum ID
Once installed, it firmly holds the cam in position until all of the proper adjustments have been made
51” (140mm) in diameter with a 3
It fits on the end of the OTC Tools Drawbar (OTC-6479) and provides a 3/8"-16 threaded hole for attaching a tool such as a wrench or socket
or 1/2 in
The OTC-6480 adapter lets you use your OTC-6480 cam holding tool with all OTC cam holding machines
It allows the cam holding tool to be mounted on an extension table or milling machine table
shank
Two adapters are required to use a cam holding tool on a milling machine table
The adapter will work with both standard roller point cams and tapered roller point cams
The adapter is easy to install and will allow you to quickly and accurately use the OTC-6480 Cam Holding Tool on many different makes of cars, trucks and heavy equipment
OTC-6480 Cam Holding Tool Adapter for OTC-6180 Cam Holding Tool
The adapter has six taper pins which are used to hold the camshaft in place
The OTC-6480 is a cam holding tool adapter for the OTC-6472 Holding Tool
This adapter allows the OTC-6472 tool to hold and control various sizes of cams up to 5
A small, yet essential, tool to help speed up the installation process of your OTC Cam Holding Tool