The Delta Marca Faucet comes with ShieldSpray technology, which cleans messes using laser-like precision. A concentrated jet pushes away sticky messes as the innovative water shield with a platter clears off the mess. Therefore, you don’t need to waste time soaking and scrubbing the unit.
Additionally, the device features a powerful integrated magnet that pulls and holds the faucet spray into place, so it is docked if not in use. The faucets with Diamond Seal have a patented design that minimizes leak points and is easy to install.
What is Included:
- Soap Dispenser
- Pull Down Spray
- Deck Plate
- Drain Assembly/ Waste
Features of Delta Marca Faucet
- Shieldspray technology that clears off the mess without causing any harm to the unit
- Optional escutcheon for a cohesive appearance and use with extra mounting configurations
- Soft, rubber spray for easy wiping away lime and calcium build-up from the spray.
- MagneTite Docking keeps the faucet spray steady in place using a strong integrated magnet and ensures it remains docked if not in use.
Unit Details
Product Type - Single Handle Kitchen Faucet
Primary Material - Zinc
Spout Type - Gooseneck/High Arc
Spray Type - Pull Down
Mounting Location - Deck Mounted
Number of Installation Holes - 2
Number of Handles - 1
Handle Style - Lever
Maximum Flow Rate (GPM) -1.8 gallons per minute
Soap Dispenser Included - Yes
Deck Plate Included - Yes
ADA Compliant - Yes
Tools
- Allen Wrench
- Plumber’s Tape
- Delta Marca Faucet
- Silicone Sealant
- Screwdriver
- Basin wrench
- Channel locks
- Screwdriver (Phillips and slotted)
- Flashlight
- Tube cutter
- Sandpaper
- Tape measure
Step 1: Turn Off the Main Water Supply and Disconnect the Plaster Guard
When installing the Delta Marca faucet, the first step is to turn off your water supply lines. Most faucets have more than one water supply valve, and as such, you should turn off the main water supply completely.
Once you turn down your water supply, remove the plaster guard using a screwdriver. Also, remember to relieve pressure after turning off your water supply by turning on your faucet.
In addition, cover your drainage system. This will prevent small parts used during installation from dropping in the drain. This is a simple job that you can do using a rug or a piece of cloth.
Step 2: Determine Where You Want to Install your Delta Marca Faucet
It is better to install or fit your faucet on your bathroom’s drywall. To do this, if there are no openings, make small ones that can fit your pipes. To create the right openings, use a hole saw, a hammer, and a standard saw.
Step 3: Install the Delta Marca Faucet Cartridge
Once you identify the appropriate installation point, the next step is to install your Delta faucet cartridge. Start by inserting the O-rings on the ends of the cartridge. Once the O-rings are in place, push them slowly into the shower valve. Now take the round faucet rim, place it over the cartridge and screw it using the plaster guard screws you had removed in step 1.
As you install the cartridge, ensure that you push it incorrectly. Spin the cartridge until the hot side is in line with the hot water inlet.
Step 4: Install the Delta Marca Faucet Handle
It is recommended to go for a level that is not too high and not too low when installing the handle. To install the Marca faucet handle, push it onto the cartridge stem.
When the handle is in place, the next thing is to tighten the handle’s small mounting screw using an Allen wrench. This will help to ensure that the handle is safely secured in place.
Step 5: Insert the Horizontal Knobs
Horizontal knobs are essential, though most people tend to ignore them. Once the faucet is well set up, the next step is to insert the horizontal knobs. Insert them upright between the two present horizontal knobs in your bathroom. In addition, you should ensure that the valve is well fixed.
By doing this, make sure there is no unnecessary movement when the knobs are installed.
Step 6: Install Faucet Head
This step is a bit challenging, bearing in mind that you should remove the old faucet head. This means loosening the hexagonal nut that holds your old faucet head using an adjustable wrench.
This is normally at the end of the shower base. After you remove it, you can now install the faucet head.
It is worth noting that as you remove the old faucet shower head, some residual water may drain from it. If such happens, don’t be scared. Remember that you started by switching off the water supply.
Step 7: Wrap the Pipe with a Plumber Tape
Once the new Delta faucet head is installed, or in place, it’s now time to wrap the threaded end of the pipe. You can use plumber tape to do this.
Do not forget to thread your faucet shower head on the shower pipe, rotate the showerhead in a clockwise direction to fix it, and tighten the nuts to secure it.
Remember to cover all the holes using a silicone sealant. You can even choose to paint or decorate the holes to make them more appealing.
Step 8: Flush the Faucet
As you work on plumbing, debris will fall into the plumbing pipes. Debris can cause leaks or even damage the sealing surfaces inside the faucet.
- Remove the black sealing gasket and aerator. Before turning on the water supply, ensure that the faucet handles are in an “open position” to get off the debris without causing damage.
- Turn on both water supply valves located under the sink.
- Let the water run for about 30 seconds.
- Turn off the faucet handles.
- Make sure there is no debris left on the aerator screen.
Bottom line
Installing a Delta Marca faucet is not as daunting as it may seem. It is a project that you can carry out in a single day. The main thing is to ensure that you have the suitable materials and tools before starting the task.
If you are sure about doing it yourself, it is good to contact a professional for help.
Our Delta products are one of the most popular products we carry. Find more Delta faucet products here!
Robert Syengo is an experienced web writer with a home improvement history that includes toilet remodeling and appliance installation. He enjoys writing and learning about electronics, gardens, design, remodeling and repair.