Honeywell, Inc. C7061A1020 SHUTTER SUPPLY VOLTAGE 115 OR 0

115/230V DYNAMIC SELF CHECKING FLAME DETECTOR ***

The Shuttery Supply Shutter 115/230V Dynamic Self Checking Flame Detector protects personnel, process, property and the environment from the hazards of fire. The unit offers a unique "RED/GREEN" light indication for universal system status monitoring in addition to other features such as: audible alarm, slope hold, manual reset, and easy installation.

Honeywell's DynaStat® Self Checking Flame Detector is a self checking device able to detect flaming fires, is not sensitive to tears in wire insulation or dirt or moisture on the contacts and has special circuitry to ignore nuisance alarms such as those caused by steam, tobacco smoke, glowing embers of cigarettes, radio frequency interference (RFI), light bulb overloads, or short circuiting from wind-blown curtains.

The 115V/230V — A1020 shutter supply voltage halogen-free flame detector is approved to NFPA 79 for use in all types of fire applications (residential, commercial and industrial). This self-checking device automatically turns off the gas flow if a flame is detected. It includes a 2-pin connector for the wall outlet, red pilot light and quick-open shutter door with a manual override. The detector features an "I" alarm output for remote indication as well as a continuity check for diagnostics.

The C7061A1020 Flame Detector is a gas shutoff flame detector. This product supports bit pattern monitoring and dynamic self checking. It complies with the UL Standard for Safety for listed gas appliances. This Flame Detector monitors gas flow electronically rather than mechanically, like a conventional flame detector.

This high sensitivity flame detector is quick to respond, easy to install, and handles the most stringent in-rush current demands of any generator fed application. This model is a 2 wire device with minimum frequency response of 50 Hz...70 Hz. Perfect for mobile home, boat or recreational vehicle generator applications.

Have peace of mind with HONEYWELL SHUTTER SUPPLY VOLTAGE FLAME DETECTOR. By combining a flame detector and shutter supply voltage control in one unit, this product has the best features of both products. When sensing combustion, HONEYWELL SHUTTER SUPPLY VOLTAGE FLAME DETECTOR automatically shuts off the supply voltage to the shutters when a fire is detected. This makes it perfect for applications such as hospitals and labs where sensitive equipment poses an increased risk of explosion due to an open circuit. For applications that require detection without shutting down the power, such as

Powers up to 30% faster than other ignition systems. The C7061A1020i is an easy to install, programmable (PLC data) Honeywell® electronic ignition system for use in low voltage (24-volt) heating and lighting applications. Its microprocessor-based electronic circuitry provides immediate independent verification of each phase, protecting the user from incorrect wiring and improper phase sequence. This series includes two modules - power supply and flame detector module - with multiple installation options and features for ease of operation.