Honeywell 13491 VR8305P2224 "1/2x1/2 10.0""WC 4.0""StepLP Vlv"

24V LP GAS VALVE FOR HOT SURFACE/DIRECT SPARK APPL

Honeywell's VR8305P2224 Vlv 2Pos 24V LP GAS VALVE FOR HOT SURFACE/DIRECT SPARK APPL. offers you a few advantages for your home. This item is very functional and will provide you with many years of good use. Also, this product is very easy to use, clean, and maintain.

The Honeywell VR8305P2224 24V LP Gas Valve for Hot Surface/Direct Spark Applications can be installed without a gas cylinder.

The Honeywell 13491 VR8305P2224 1/2x1/2 10.0""WC 4.0""StepLP Vlv 24V LP Gas Valve for Hot Surface/Direct Spark Appliance has our largest commercial grade solenoid with a higher capacity then all other valves. Our Valve is also used in the following applications:

HONEYWELL's VR8305P2224 is a 24V, 1/2" gas valve for hot surface detectors or direct spark applications. This part has been manufacturered to meet or exceed Honeywell's remarkable performance standards for precision, safety, endurance, and quality.

With our selection of gas valves, you'll have everything you need when you're installing a heating device. The hot surface valve is for use with a direct spark ignition system making it great for furnaces and warm air units. The valve itself uses a pilot to ensure your furnace or boiler can still start even if there's no flame. With a range between 3/4"NPT and 5/8"NPT, the hot surface/direct light pilot can handle 1/2-inch and 3/4-inch piping in diameter and 10 feet long. The thermal overload helps prevent overlinking, which can damage your

The Honeywell 13491 VR8305P2224 model is a 24 volt gas valve for direct spark applications. Also known as gas valve, this product falls under the Heating and Cooling Equipment category which has power ratings of up to 1/2 horsepower. This Honeywell product has a description of Six pole, two position, dual stem, pilot operated gas valve. The 13491 VR8305P2224 has been designed with the Busch proprietary engineering method called VSP (Variable Speed Pressure) which uses pressure impulses instead of one burst of electricity for increased efficiency and longer life.

The VR-8305P Series Valves feature a standard 2-screw port size in an easy to install 1/2" NPT configuration. The valves are designed with an approved gasket kit and requires no special support bracket required for wall mounting. In combination with Raypak®'s well-designed manifold systems, the valves can be installed in a variety of different ways in residential and light commercial applications.