Honeywell 3005/B PNEUMATIC SWITCH 3-15 PSI

PE AirSw 3-15# SPDT

3-15 # SPDT, 3WV. Multipurpose Air Switch

The Honeywell 3005/B Commercial Air Pressure Switch features a 3-15 psig range with SW1/OFF SPDT contacts. The polyetherimide housing is electrically nonconducive for use with intrinsically safe circuits, and the seal within the diaphragm assembly exceeds 12 inches of water. Meets EN54, EN61010-1 Cat. II/300 VAC safety standards.

The Honeywell 3005/B is a Pneumatic Switch 3-15 PSI. Air Switches are used in air operated control circuits to open or close switches in response to air pressure changes in the controlled circuit.

The Honeywell 3005/B Pneumatic Switch 3-15 PSI, is a Pneumatic Pressure Switch, 3-15 PSI air pressure, rated for 120 VAC, 15-0 CFM.

Honeywell Pneumatic Switches 3005/B and Air Switches Actuator Model AS3005/AS3005B are SPST, normally open pneumatic switches that can be used to initiate air or compressed air services from -3 PSI up to 15 PSI. These pneumatic control valves may also be used as limit switches since they have a seal available to cover the actuator field hole.

The Honeywell 3005/B Pneumatic Switch 3-15 PSI has a built in differential pressure switch that provides 3000 strokes per minute (STM) operating frequency. The 3005/B is flexible and works with applications such as air curtain controls, medical suction equipment, and compressed air applications for general use.

Honeywell 3005/B 300 Series Pneumatic Switches are designed to meet the highest performance and safety requirements of critical control applications. Made for demanding power transmission need, the 3005/B switch is rated at 3 to 15 PSI (0.21 to 1.04 bar), and handles 5 amps at 115/208-230 VAC 60 Hz. The 3005/B features terminal blocks on actuator and common connections for quicker installation, an adjustable actuator, 0.36 inch mounting hole, and a rugged zinc die cast housing with a baked on polyester finish that resists chemicals, abr

A pneumatic on-off switch for general purpose use. A new look, same performance. Proven performance by the world leader in switches for more than 55 years. Molded of durable, light weight plastic. Polycarbonate actuator ensures long life and trouble free operation. Plunger travels smooth and positive on steel shafts guided by nylon bushings inside non-corrosive aluminum body. Proven reliable operating characteristics by over 55 years of field use.

The 3005/B is a small pneumatic switch designed for air or other non-aggressive gases or liquids. A cylindrical actuator is encased in a durable, molded plastic housing and rated for a wide temperature range of -4°F to +166°F (-20°C to 76°C). The easy to read dial display includes a dual beam indicator. The thin actuator minimizes the space required to mount the switch.

The Honeywell 3005/B Pneumatic Switch is a 3-position low pressure switch with a pressure-actuated reset. This pneumatic switch is designed to control normal lighting, exhaust or vent fans.

The Honeywell KS3005B Pneumatic Switch is a Solenoid Actuated Electrical Switch used for switching or controlling of pneumatic devices. This switch has three ports, normally open, normally closed and common connections. It is an non-latching type of pneumatic switch which is sealed enclosed with glass lens for protection.

The Honeywell 3005/B is a B-Series 3/2-way, pneumatic pressure switch designed to control water flow in potable water applications. The Honeywell B-Series family of pneumatic pressure switches (including the BDP and BDPA models) offer a wide range of sizing and design options for most common and specialty pneumatic applications.