HONEYWELL 316584 24V AUTOMATIC ROUND DAMPER (NORMALLY OPEN) 8 INCH

24V AUTOMATIC ROUND DAMPER (NORMALLY OPEN) 8 INCH

Honeywell 316584 24V Automatic Round Damper (Normally Open) 8 Inch Features & Benefits: Easy installation ­ Plug in the automatic round damper with the included wire leads and plug in power (24VAC) 8 in. – Fits into square holes 1-1/4 inch minimum diameter Material: Stainless steel

The Honeywell 316584 is a 24V automatic round damper with normally open position. The hollow shaft on the damper turn has a diameter of 0.591 inch and measures 8 inches long. It has an effective opening range of 3/4 to 4 inches, meaning air under pressure can pass through the dampers bypass orifice flow channel. The 316584 is made of aluminum which enables it to be lightweight, yet extremely durable.

The automatic Honeywell Round Damper, 316584 has a normally open operation. It is suitable for use in high-temperature environments, making it the ideal choice for your industrial setting. This Round Damper has a diameter of 8 inch and comes with a standard hex base mounting hub. To ensure longevity, this Round Damper has powder coated steel hardware and an epoxy finish.

The 316584 Honeywell Round Automatic Damper with normally open function is an automatic device that uses a pneumatic lock to control external dampers in ventilation systems. The 316584 is normally open to be used as a positive shut-off control and can also be utilized as an adjustable reduction of fan capacity to control mechanical ventilation in larger buildings. This 8 inch round damper is recommended for air flow volumes of up to 500 cfm and has a discharge area of 14 square inches. It is designed

• This automatic Damper can be mounted either vertically or horizontally, and is used with fans to control airflow. There are three models available - normally open, normally closed and reverse-action. The 316584 is normally open

This damper opens automatically or manually. It consists of a round motor-driven disc resting on a flat plate. A pair of zinc plated nails are driven into the wall from the inside of the duct to hold it to the outside wall. The disc can be adjusted clockwise or counterclockwise by turning nuts located on the top and bottom edges of the disc. The motor is controlled by a normally open micro switch that is mounted on one of the arms of a double-headed rocking lever fast

Brand new in manufacturer packaging. Honeywell round dampers with automatic control allow for differential pressure and temperature. They are ideal for use in installations where a variable air volume supplied to a space, an outdoor air system, or a heating or cooling system is required. Ideal for use in any forced-air ventilation system or other air distribution systems,