Honeywell 3265 1000 Series Zone Valve

24V ZONE VALVE (1/2" SWEAT, 2-POS, N/C

The Honeywell 31650 1000 Series Low-Voltage Zone Valve is powered by 24VAC. It can be used with a Honeywell 31000 Series or 31001 Series programmable controller and it has built in temperature compensation. The zone valve comes with two 1/2" sweat, non-crimp connections.

The Honeywell 3265 series zone valve is a 24 volt, normally closed 2 position, magnetic latching zone valve. It has an operating range of 0 to 10 gpm with a minimum on-off temperature of 32°F. This zone valve features two mounting ears that require 2.25-inch clearance from the ceiling and/or wall to the end of the valve body.

The Honeywell Programmable 3265 Series zone valve allows for on demand heating/cooling of your entire home. The 24V Zone Valve features a 2 position handle which allows you to control heating/cooling for a single zone with the convenience of the handle. You can simultaneously control multiple zones if you choose to do so by using two valves and operating the handle in a push-pull fashion.

The Honeywell Zone Valve 3265-1000 is a 24V zone valve that is used in residential and commercial Zoned Heating and Cooling systems. The Honeywell Zone Valve 3265-1000 is automatic, which means it is not necessary to turn the valve on or off, as the temperature of the room will be maintained constantly. This product was made in China by Honeywell, a well known company that has been around since 1899. Also this product has no affiliation with Amazon's "Fulfilled By" program.

The Honeywell Zone Valve uses a non-field convertible on/off 24V control head and offers the ability to program up to 12 ON-OFF cycles per day. The zone valve will operate an unlimited number of zones and includes an exclusive "clock" feature that uses your local Standard/Daylight Time to automatically adjust the time that each zone operates. For example, a zone programmed for a 7 hour ON cycle and 3 hour OFF cycle at 8:00am, may be adjusted to actually turn off at 5:00pm if Daylight Savings Time is applied. This unique Zone Valve may apply all "C" schedules required

The Honeywell Zone Valve allows for independent control of water temperature in 2 separate zones. This zone valve is designed with a 24 VDC motor and will work with pump pressures of up to 250 PSI, as well as indoor or outdoor use. It features an adjustable set temperature limit, audible alarm when the temperature exceeds this limit, adjustable deadband, and non-latching reset mode.

The Honeywell Zone Valve is a direct replacement for any zone valve on your current system. It is designed to fit within the 3265H1000 series. The 3265H1000 series zone valves are compatible with HVAC systems that include: humidifiers, dehumidifiers, space heaters, baseboard floor heaters, and radiant heaters. As with all Honeywell thermostats, the 3265H1000 series zone valves feature an easy-to-use interface and consistent performance.