×
Free Shipping @ Any Price
Best Price GUARANTEE
30 days money back
HONEYWELL 342070 CONTROL BALL VALVE WITH ELECTRIC ACTUATOR - 1/2 IN NPT - 2-WAY - 2 CV - PLATED BRASS
click to zoom in
  • sku METO-161107
  • Weight: 0.00 LBS

HONEYWELL 342070 CONTROL BALL VALVE WITH ELECTRIC ACTUATOR - 1/2 IN NPT - 2-WAY - 2 CV - PLATED BRASS

Price: 2099-12-31 $237.98
Free Shipping
In stock
1 days
  • Shopper Award

CONTROL BALL VALVE WITH ELECTRIC ACTUATOR - 1/2 IN NPT - 2-WAY - 2 CV - PLATED BRASS

The Honeywell 342070 Control Ball Valve with Electric Actuator is a two-way solenoid valve that is used for remote control of fluid flow. This ball valve has a 1/2 in. NPT female connection, is made of brass and die cast iron, has an electric actuator, and lasts up to 10 million cycles. The actuator comes with a white nylon body, plastic trim ring and cap, a metal frame, and a 12 ft. 2-conductor shielded wire.

This Champion 342070 valve by Honeywell serves as a gas valve to control propane and natural gas flow. In addition, the 2-way valve has an electric actuator that can be serviced by connecting to the 1/2 in NPT threaded connection. The ball valve is designed with a plated brass body that is corrosion resistant and suitable for multiple uses.

An electric actuator is a motorized mechanism that controls the action of valves or doors. Electric actuators are typically used to open or close valves or doors when triggered by a signal from an electrical controller, timer, or sensor from a process. Our electric actuators may be either 2-way or 3-way configuration. They are constructed of water and corrosion resistant materials. Our Actuators are designed for plated brass, cast iron / AISI 304 stainless steel ball valves with 1/2" NPT ports and specifications as follows:

This two-way plated brass 2-circuit control ball valve allows the flow of fluids in either direction. This 10-wire, electromechanical actuator sends a signal to the control ball valve's solenoid to open or close the valves. Ideal for commercial, industrial and residential applications.

The Honeywell 342070 Control Ball Valve with Electric Actuator is a one-piece design with a ball type valve with plug, pilot operated. These are great for controlling water, air or gas in your plumbing. This one has a 1/2" NPT male swivel connection.

The 342070 Control Ball Valve With Electric Actuator has a Body Material of COM. Its Inlet Port Connection Size is 1/2 in Nominal, and it falls in the category of Valves & Flanges. It has a Force Rating (lbf) of 50 and 0.0 psi (0 bar). - Honeywell Sensing and Control

A control ball valve connects to the supply and return lines of an electric convection heater where the outside air temperature is controlled. The electric actuator turns the valve on and off as needed, regulating the heat that flows into your room or building.342070

1 days
  • Weight: 0.00 LBS
to top