HONEYWELL 342166 CONTROL BALL VALVE WITH ELECTRIC ACTUATOR - 1/2 IN NPT - 2-WAY - 2.6 CV - PLATED BRASS

CONTROL BALL VALVE WITH ELECTRIC ACTUATOR - 1/2 IN NPT - 2-WAY - 2.6 CV - PLATED BRASS

HONEYWELL 342166 CONTROL BALL VALVE WITH ELECTRIC ACTUATOR is a 2-way, 2.6-cubic-foot-per-minute control valve that is designed to control hot water flow in radiant heating or domestic water systems.

Honeywell's 2-way electric actuator control valve with 1/2 in. male NPT threads to operate a ball valve. It has an adjustable range of 0 to 2.6 CV and is suitable for liquids and gases.

This 2.6 CV Flow Control Valve with Standard 1/2 in. body with electric actuator, is designed to fulfill the requirements of residential and light commercial applications. The valve features a thermally protected motor, centrifugal operation for fast heat dissipation, non-flammable insulation between the actuator coupling and valve body, totally enclosed reed switch with fail safe operation for added safety, a complete stainless steel construction for superior strength, durability and long life, and a temperature range of 32F to 140F (-0.5C to 60C), maximum differential pressure of 15 psi (1 bar) shut off

The Honeywell 342166 Valve is constructed of cast-brass that will resist chemical attack, and will not corrode over time. This valve has a 2.60 CV. The valve opens using electric actuator with a 1/2 NPT male thread.

Keep food processing and handling equipment operating at peak performance with an electric actuated ball valve. Ball valves have a spherical rod of soft metallic material positioned between restricting orifice plates. The rod is free to rotate about its axis, but is locked by the orifices in both ends. Offering two-way flow control, it boasts an all-brass body with a plated brass lever and shaft.

A ball valve is a control valve used in piping systems to selectively control the flow rate or direction of fluid flow. This ball valve features a two-way style. The actuator is an electric actuator, and the lead length is 3. The control configuration is normally open. Dimensions vary per model.

The NxT Control Ball Valve is a precision ball valve, with all-position, spring-return, fail safe electric actuator. It is recommended that the control box be mounted on the outside of the panel, for proper cooling ventilation. This valve offers superior performance in extreme conditions.