HONEYWELL 343879 CONTROL BALL VALVE WITH ELECTRIC ACTUATOR - 1 IN. - 2-WAY - 54 CV - PLATED BRASS TRIM

CONTROL BALL VALVE WITH ELECTRIC ACTUATOR - 1 IN. - 2-WAY - 54 CV - PLATED BRASS TRIM

Honeywell's 343879 Control Ball Valve with Electric Actuator - 1" is an 2-way, 54 CV valve that features plated brass trim and a fluid capacity of 25 sec. It has a Cv value of 54 and is NPT threaded and has a 1" female pipe thread. It also has an actuator with pilot and operator handle, rotary stem position indicator, plastic hand wheel lock system, quick connects on inlet components, spool packing for fluid tightness protection, and metal ball shut off.

A 2-way, 1 in. diaphragm control valve is included to help ensure reliable performance even under the extremes of temperature, pressure, and liquid conditions.(1) With a 54 CV(2), the ball valve facilitates optimal handling of liquids or gases. The stainless-steel body of this fully-plated brass trim lever handle control valve provides lasting service in applications involving corrosives, chemicals, and natural gas.

The 1" Control Ball Valve with Electric Actuator provides low-pressure inlet control and is designed for use with single-phase electric motors. It includes mechanical seals, a ball valve, and a hand-operated actuator. The actuator provides limited upper positioning of the stem while maintaining a large downward stem motion.

The 354084 control ball valve with electric actuator combines the features of an electric actuator and a control ball valve to offer you many options in one compact package. The open/close operation can be controlled by either an electric actuator or manually operated lever, allowing you to have infinite possibilities. The standard lever allows for manual control of flow through the valve, while the optional flowmeter may be installed for automatic control of flow through the valve.

This 2-way ball valve is designed for use with HONEYWELL 1" pumps, fluid measurement devices and other instruments that require a ball valve. This hand-operated valve has a clamping nut instead of a bonnet used with mechanical seals. Positive sealing is ensured by an O-ring on the stem and a gasket. The valve housing includes an integral actuator motor and control box, plus field wiring connections. It can operate individually or be wired for 3- or 4-way applications.

When you need a ball valve that's tough enough to last in tough conditions, the 343879 is the answer. This 2-way ball valve is designed for split system air conditioners and other residential or light commercial systems that use an electric actuator with a switch or thermostat to open or close the equipment.

The electric actuator eliminates the need for an external control device, and optimizes valve actuator performance in all applications. The trim design allows for a more compact installation.