HONEYWELL 349012 Non-Spring Return Direct-Coupled Damper Actuator - 5Nm 44#

Non-Spring Return Direct-Coupled Damper Actuator - 5Nm 44#

HONEYWELL 349012 Non-Spring Return Direct-Coupled Damper Actuator - 5Nm 44#

The 349012 Non-Spring Return Direct-Coupled Damper Actuator - 5Nm  44# from Honeywell is a uniquely designed HVAC damper actuator for standard slide and snap action, rolling and swinging dampers in air intakes and exhaust systems. The 349012 is eligible for lead free status. This actuator works on AMCA, ANSI 61.1, ANSI Z83.4-2007, UL 300, and NFPA 90A-2010 certified devices.

Our HONEYWELL NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATOR - 5NM #44# is a damper actuator. It comes with cylinder, piston and spring. It is used to make your heating and cooling system more efficient and quieter. The damper actuator acts as a precision valve by allowing you to control the air flow in your duct system.

Simple, low cost, fully-contained installation. Servo compatible for zero lead applications. Lead through mounting feet provided. With 5Nm 44# spring return direct coupled damper actuator offers versatility in applications ranging from gas furnace primary and secondary control to HVAC systems requiring variable speed blower control. The actuator is ideal for use with packaged terminal air conditioners as well as many packaged terminal units up to 225k Btu/hr. See website for full list of applications.

Qwik-Aire 5Nm Non-Spring Return Direct Coupled Damper Actuator is designed to work on humidifiers that do not have integral temperature compensation. This actuator is controlled by the 5v output in relation to the evaporator water temperature sensed by a sensor. It has +/- 2% full scale deflection per amp and has a 20 amp current draw.

This non-spring return damper actuator is designed for use with duct dampers. The actuator features a 5Nm minimum torque and provides 44# of torque at 180 degrees.

The 349012 is a general purpose non-spring return direct-coupled damper actuator in nylon construction. Constructed of nylon and aluminum, this actuator conveniently mounts with only 2 screws and has 2 magnets to attach to any magnetic drop pipe or dampers. The 349012 comes with a 0.591" diameter 16 gauge wire leads that are 43" long allowing for quick connection to an external power source.