Honeywell 50021579-001 Sensor Encapsulated Platinum for T775 New Series Controllers Refrigeration Kits

"STD T775sensor

Enjoy the best possible temperature from your T775 thermometer with this sensor encased in platinum. It is compatible with new and old series T775 thermometers, and will operate for five years or 500,000 hours."

Sensor Encapsulated Platinum for T775 New Series Controllers Refrigeration Kits

This sensor can either be used with a new controller or by replacing the inductive T-wire after failure. It is compatible with all T775 controllers including, but not limited to: T775-A, T775-B, T775-C, 50021579-001, 50021579006."

The 50021579-001 sensor is a 3-wire, platinum type, mounting hole size 0.938 in., 3/4 in. NPT process connection that features a -40 to 60 deg C temperature range as required by the T775 series controllers. Master Match™ technology provides consistent performance from sensor to sensor, while the Sealed Bipolar Sensor eliminates the chance of dust and foreign matter in the sensor." www.honeywell.com

The Honeywell T775 sensor is oven-proof, cast iron and features a silver finish. This sensor is designed for use with the Honeywell T-series control boards. It has a lifespan of 50,000 hours of continuous operation at room temperature

Honeywell's T775 sensor is fully encapsulated near-isothermal platinum resistance thermometer with 9.4-mm sensing length, and built in connection housing. The sensing element is a spiral wound platinum filament connected to a wire lead (250 mm maximum) via a welded stainless steel sleeve. The resistance value of the thermocouple is dependent on the temperature measured by a resistance reading taken between the ends of the filament (1.5 mm diameter). An excess length of filament creates an adjustable temperature above ambient, which is compensated for during precision calibration. This series of temperature sensors are used as process input for cry

For use on T775 New Series Controllers in commercial refrigeration applications. This platinum sensor is encased in a double glass-sealed epoxy capsule to protect against contamination, resulting in long lasting accuracy.