Honeywell E3H2S Analytics/Vulcain E³Point Sensor Cartridge Hydrogen sulfide (H2S) -

HYDROGEN SULFIDE SEN CARTRIDGE

The hydrogen sulfide (H2S) sensor cartridge is designed for use with Honeywell and Vulcain E³Point detectors. The H2S sensor is a snap-on cartridge that attaches directly to the E³Point detector circuitry.

Honeywell Environmental Solutions Announces Release Of Watersense Hydrogen Sulfide Vapor Sensor Cartridge

The MSA Honeywell E3H2S Analytics/Vulcain e³Point Sensor Cartridge is designed for the following: E3H2S Hydrogen sulfide sensor, which provides continuous monitoring of H2S levels in an area. This product is a direct replacement for the MSA 17850 and 178510 cartridges. it is perfect for areas where H2S levels need to be monitored long-term and H2S exposure risk assessments are required.

The E3H2S Analytics and Vulcain E³Point Sensor Cartridge allows you to view concentration levels of Hydrogen Sulfide (H2S) (0-5000 ppm). The cartridge can be used with the Analytics Series 5200, 5300 and 5320 Smoke Detectors (PNs 41852, 41348 and 41707) as well as the 5340 or 5440 Combination Gas and Carbon Monoxide Alarm (PNs 41452 and 43916).

The Honeywell E3H2S Analytics/Vulcain E³Point hydrogen sulfide (H2S) sensor cartridge enables users to sense low concentrations of H2S while protecting themselves from potential H2S exposure. It is integrated with the Analytics E3 alarm and display board and the Inoventor and Enterprise gas monitors. The cartridge provides a 2–20 ppm digital output, displaying concentrations of H2S in parts per million (ppm) via the gas monitor user interface. This cartridge can be used for analyzing, optimizing or troubleshooting systems that contain hydrogen sulfide, such as oil

E-3H2S Cartridges – Honeywell Analytics Media Primary Uses: For determining the concentration of hydrogen sulfide (H2S).

Seals the gas stream to prevent harmful exposure to Hydrogen Sulfide (H2S) and other contaminants. The E3H2S sensor must be replaced every five years.