Honeywell DC120L10001000 MICRO-PRO UDC120L 100-240V-AC CONTROLLER B427154

DC120L-1-0-0-0-1-0-0-0

This DC120L-1-0-0-0-1-0-0-0 (or Dc120L-1-0-00) controller provides the ultimate power in the smallest size. It can control up to 5 DC load devices from 12 to 24V when combined with an appropriate double pole relay module. The unit features contact sense on all outputs which will reduce the burden on your control system when all stationary outputs are active. ## Preview ***

This part controls the air flow to zone 2. **DC120L-1-0-0-0-1-0-0-0

The Honeywell 18000 series MICRO-PRO Remote Controller is a controller designed to control 24 VAC electrical loads. The DC120L-1-0-0-0-1-0-0 controller has zero delay time and is able to maintain a long life without thermal runaway. This controller serves as an easy replacement for older controllers that have been damaged or have stopped working altogether.

The Honeywell DC120L10001000 Micro-Pro UDC 120L 100 to 240 V AC Controller (B427154) is used in the following models: B22D600, B22D700, B22F500, B22F700, B22F800, B25F700 and part of HCM060. The Honeywell DC120L10001000 is used in a number of devices as a power source such as stoves and ovens.

The DC120L is a 100-240VAC low voltage controller with an adjustable output current 0 to 100MA. Ultra compact main circuit board for easy design integration and lower costs. The DC120L offers diagnostic capabilities with status monitoring, including output current, overshoot, and error flag indicators via LEDs. The control loop uses level-shifted current source architecture with super fast transient response time and high accuracy.

The DC120L is a 12 VDC low voltage microprocessor-based controller. It may be set to provide automatic control of lighting and security device or controlled manually. The solid state design can be well protected from surges and noise from external sources. The controller monitors the voltage level of the load. If the load voltage is less than 12 V, then no power will be passed to the load. Outputs are current limited to 50mA max. When the system is wired for 24VDC operation

Our MICRO-PRO™ microprocessor controls are ETL Listed to meet UL Standard 1072, a recognized worldwide safety standard for thermostats. DC120L10001000 Microprocessor Controls are available with any combination of VOLTAGE (100-240VAC), 1/2 to 5/2 PHASE (1 to 3 PH), CURRENT, RH and BAC for economical one size fits all applications. Special Features: