Honeywell DS06-103-SUS-LF "1.25""swt PRV 25-90#SingleUnin"

"1.25""swt PRV 25-90#SingleUnin"

Honeywell's 1.25""swt PRV 25-90# SingleUnin nds to optimize steam power and deliver a high flow of steam to satisfy your production demand. The rotor is made of stainless steel components that resist corrosion, so there's no worries about wear and tear. It's also PLC-ready, giving you the opportunity to pass and store data in digital format for increased production control. These features make the Honeywell DS06-103-SUS-LF "1.25""swt PRV 25-90#SingleUnin"hly effective in acid cleaning,

Whatever your project, the Honeywell (T1063912) 1.25" Sweat PRV 1-1/4" Npt Female 25# - 90# Single Union will be a great choice for you. The unique design of this product ensures that you can adjust it to match with your needs. It is made from superior materials, which improve its quality and sturdiness. The product is designed to provide long-term use. That is why it can be relied upon to deliver desirable results.. This product will give you firm grip on your application.

The DS06-103-SUS is a 25/90 PSI, 1.25" Swt PRV, unitized design wet pipe sprinkler valve. Suggested use is for flat roof applications with a single sprinkler and Proprietary back check system that helps prevent freeze damage. The plastic body is low density polyethylene with a maximum working pressure of 90 psi and is a self contained, direct acting, non-metered, bonnet type valve.

The DS06-103-SUS-LF is a single universal pressure reducing valve for reduced flow of 25 to 90 pounds per square inch (psi). The Type S upstream diaphragm operates with 10, 15, 20, and 25 psi air. It also controls compressed gases up to 90 psi.

The 25-90 PSI Single Stage Replacement Diaphragm Pressure Switch is designed for use with Resistance Foil Heaters (Sizes LP & NG) and non Heater Air Handlers.

This ??is a brand new two stage energy efficient single-stage (6-way) valve. This pressure reducing valve is designed to reduce a line pressure of 250/300 PSI down to approximately 25/90 PSI for water conservation and efficiency. The DS06-103-SUS-LF is constructed with bronze brass body, stainless steel stem and bonnet, and a Storz pop off.

The uniflow steam trap is designed to remove condensate from the drain side of a heating or hot water system in order to prevent poor thermal efficiency, with all models full port design (when installed) it effectively prevents back flow into the boiler should the system become obstructed and their compact size and 1-1/2"" 150# operating pressure range makes them suitable for usage on small capacity solar/power boiler systems.