Honeywell DS06-104-SUT-LF , Inc. DS06104SUTLF 1.5"DialSet PRV W/Bypass15-130

"1.5""DialSet PRV W/Bypass25-90"

Honeywell 1.5""DialSet PRV W/Bypass15-130 Pressure Reducing Valve. Honeywell TRV's work as two parts; one part is a pressure regulator and the second part is a pilot operated relief valve (PORV). The TRV provides a constant source of pressure to a tank or other controlling device while maintaining the minimum safety pressure setting.

The Honeywell 1.5" DialSet PRV W/Bypass 15-130 Mechanical Water Pressure Reducing Valve is electro-mechanical in design and incorporates a 0.5 HP tweaker motor. This Moeller valve features a 1.5"" face, reducing two independent pressure streams to one common outlet.

The 1.5""Dial Set PRV with Bypass is designed for use in humidified and ventilated, mechanically ventilated, and unventilated rooms. It is an effective solution for commercial heating and air conditioning applications. The product is intended for applications such as mitigating excessive condensation from cooling coils, dehumidifying the air when reheat or economizer operation are employed, controlling humidity in structures such as closets and dungeons, combating moisture migration into insulation and wallboard in unheated spaces from outside areas, retaining comfort by minimizing excessive cold air drafts in winter.

Honeywell's D06 series regulator provides increased pressure capabilities with a high/low pressure switch. The 15-130 regulators are for vacuum and low pressure industrial uses. Controls range from 0 to 25-90 psig, and have 1/8" NPT connections with a WOG fitting up to 1.5" inlet and outlet.

Use the V-flow Pressure Reducing Valve Kit to provide a means of implementing an individualized, optimal pressure plan using a single, economical pressure regulator. The V-Flow design allows you to create a system pressure profile designed to optimize operator comfort and maximize energy efficiency for each unique patient.

Our bypass humidifiers are ideal for evaporative (evap) dehumidifying applications. These humidifiers are designed to heat a supply of water, and then feed the heated water through the wick filter system, which in turn transfers moisture from the air to the collected water. This particular unit has a push button (dial) adjustable humidity output control.

The Series 6013 is an adjustable-orifice, 2-stage, normally-closed on/off valve designed for use with commercial displacement pumps in central heating and air conditioning systems. Well suited for use in high ambient temperatures, the Series 6013 provides a noncorrosive, tight shutoff valve with pressure discharge to atmosphere. It is not designed for use with steam or hot gases.