Honeywell L6006C1034 HI/LO Limit Aquastat w/CirCtrl

HI/LO Limit Aquastat w/CirCtrl

The Honeywell HI/LO Limit Aquastat w/CirCtrl provides you with precision temperature control for hydronic heating systems in commercial and residential buildings. It is designed to be mounted in a baseboard or convection space heater control box. The thermostat includes a separate circulator pump contact, which allows you to connect the circulator pump and system return line to the same terminals on the contactor.

Increase the versatility of your hot water heating system by adding the Honeywell HI/LO Limit Aquastat w/CirCtrl. With a proven 90+ year history as one of the world's leading manufacturers of control and heating equipment, Honeywell offers products for almost any application.

Unison products provide superior control over your heating and cooling system by using Honeywell's best technology available. The L6006C1034 HI/LO Limit Aquastat w/CirCtrl delivers true humidification control and variable fan speed for both cooling and heating modes. Its programmable logic control (PLC) controls all system functions from the indoor unit, including temperature set point, humidification, and fan speed. This enables the unit to be programmed with no separate thermostat required. With a streamlined design and simplified installation, Unison products are perfect for any residential HVAC application where cost conscious and

The L6006C1034 HI/LO Limit Aquastat with CirCtrl automatically turns on to a low-temperature circulator when the water in your tank is below 55°F (12.8°C) and off at temperatures above 90°F (32.2°C). At any temperature between those two points, the circulating pump runs on low speed.

The HONEYWELL Aquastat HI/LO Limit with Circculate Control is a snap-action direct acting temperature controller for use in residential heating systems. It provides infinite temperature regulation with low energy from a gas, oil, or electric supply burner within the range of 40°F to 120°F. It combines an adjustable upper limit switch and an adjustable lower limit switch. A single-stage heat blower controlled by a 3-position rotary selector switch is often used in conjunction with the HI/LR Limit Aquastat. The selector switch allows automatic programmed temperature control of the furnace for economizing fuel use

The Honeywell HI/LO Limit Aquastat Control is an immersion type temperature controller. It is for use on instant hot water heating and central heating systems only, where the heating system is designed to maintain temperatures within safe limits. The immersion heater or strip heaters must have a minimum flow of 2 GPM through the system. This control unit provides automatic operation for maximum and minimum setting temperatures between 55-80°F (13-27°C), in 1 degree increments within compact metal enclosure.

The L6006C1034 Honeywell Limit Aquastat is a control for an existing single-loop water-heating system, which allows water temperature to be reliably maintained at user setpoints within ±3 °F. The device can be used in conjunction with a direct-fired water heater, or with a hot-water recirculating loop where the potable source is heated by an electric water heater or boiler.