Honeywell M847D-ZONE 24v S/R Open AirZoningDampAct
TRUEZONE REPLACEMENT ACTUATOR - ZON The Universal Zone Actuator from Honeywell is used in conjunction with the 875 series of open air zoning dampers and the 831 damper actuator designed for most...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account24V MODULATING NON-SPRING RETURN NC ACTUATOR INCLU
The M9484E1033 is a 24V modulating non-spring return NC actuator. It has an operating input current range of 1.1A to 2.2A with a holding current range of 0.1A to 5.5A and a holding torque of 150 lb-in. This unit is designed for fail-safe operation in wet, dirty, or shock hazardous locations and includes a 1/2" NPT fitting for gas discharge service in hazardous areas classified as Division 2 and Class II and Zone 22G. The M9484E1033 is rated at NEMA 4X for
The Modutrol III Series 24V, wet-rotor, non-spring return, NC actuator provides an economical solution for applications that require closed loop control of a load. The Modutrol III is available in high levels of power (150 to 600 lb-in), in stroke lengths up to 50mm.
The Modutrol IV is an efficient and economical standard 24vdc gearmotors for repetitive control applications. These are non-spring return, non-parking type, open/close rotation only. This wide selection of gear ratios enables operators to select the correct motor for a variety of different tasks.
Power HVAC and air handling valves directly from your 24 VDC system with Modutrol IV. This motor can be used for many different applications: the M9484 is typically found atop a conical damper, but it is also frequently used with low- to mid-capacity relief valve actuators and in pneumatic positioners. A magnetic starter standard on this motor provides energy savings over spring return designs, and the open-dripproof construction means it stays dry inside for all-weather reliability.
The Honeywell Modutrol Actuator range features a tremendous variety of actuators to meet your unique applications ranging from the Modutrol IV (150 lb-in.) – (1033) at 24VDC to the Modutrol II (1) – (123) at 120VAC. Actuators are ideal for many different industries including HVAC, machinery controls, amusement rides and retrofits. The series is available in manual and pneumatic actuation.
This is a Motor, for a manufactured home, MODUTROL IV. It is 24 Volts. This part can also be identified by manufacturer's part number: M9484E1033. For more details please call us at 1-888-269-9261 or visit us at www.PartDeal.com
Motor for use with Modutrol IV pressure and level control.