120V MODULATING W/2 AUX. SWITCHES 3
A 120-volt, modulating, scroll compressor and 2 auxiliary switches make it easy to customize the temperature from any remote location. The double heat exchanges improve energy efficiency and reduce cycles. Plus, an A coil, steel-bodied fan motor and integral stator assure years of reliable operation.
The Honeywell M9174C1025 is a 120V 2 speed fan motor with 2 Aux. Switches. It features a steel laminar flow, inlet filter on motor and inlet side, and has an ambient temperature capability of 122 to 145 degrees F indoor. This device has 1/3 HP at 0.18A single phase and comes equipped with a 4 pole rotor and stator and uses only 0.041 Ft³/min of air space
Modulating 120V Motor. Switches from Cool Down to Full Speed in Five Seconds. 75 Pounds of Cooling Capacity per Speed. These Fans circulate 150 – 180 CFM's of Air at full speed. Only 3/4 Inch to Install.
Featuring the same trusted performance and reliability of Honeywell's Standard Motor, the MW series is a general purpose motor with 3 speeds. Designed for general purpose applications from 1/3 to 3 HP (1.4 to 7.0 kW) where slow speed operation is desired, it provides ample power for a wide variety of machines in applications such as small batch mixing, material handling and conveying, pumps and blowers. Available rugged 14-gauge steel frame construction in 208 or 230 -VAC with a wide range of mounting provisions and seven different power ratings, this versatile motor is adapted for use in a variety
Honeywell/Amerimatic 2312M-9174C-1025 2 Speed Heavy Duty Pilot Operated Gas Burner (comes with 2 switches)
Honeywell 2312 Fans' primary purpose is to supply supplemental cooling during hot weather...Three models are available that operate universally at 208/240 V…The 115 V fan has a 1/8 hp permanent magnet motor with a shaded pole rotor and centrifugal switch, and the feedback signal to the ECM is obtained through a thermistor in the motor...
The Honeywell 2312 is supplied with normally closed and normally open safety switches. Each switch can be activated by referring to the wiring diagram that is included in this manual.
Free Shipping
In stock
