Honeywell, Inc. V4055D1035 On-Off Fluid Power Gas Valve Actuator, 120 Vac, 60 Hz

120V FLUID POWER ACTUATOR 13 SEC. W/AUX. SWITCH W/

This valve actuator is suited for use in low-speed hydraulic systems that require water-resistant switching, such as industrial lathes and conveyors. It comes with a 13-second response time from off to on, a built-in auxiliary switch, and an acoustical alarm with adjustable parameters to let you know when it has been turned on or off.

The V4055D1035 on-off fluid power gas valve actuator is a two position, power piston, coil spring return valve designed for use with pneumatic controls such as modulating controls. It can also be used directly with solenoid valves or pilot operated load controls. The standard mounting configuration of the V4055D1035 specifies mounting in up and down orientation (valve handle down). The V4055D1035 is supplied with auxiliary switch and wiring between the primary actuator control circuit and the auxiliary switch.

The V4055D1035 new production replacement fluid power gas valve actuator is a three-port design rated at Class I, Division 1/2, Groups C&D that includes an Integral Auxiliary Switch (power indicator light) and On/ Off Switch. It does not include a supply line connector or pressure indicator (PACB), but it does have a 16'' coding cable. The size of this unit is 0.93 in.( H) x 2.24 in.( D) x 6.39 in.( W). The actuator includes a PTFE seat ring, internal return springs for gas

With this revolutionary, patented combination design, you can have your fluid power anywhere in the world for use with gas valve actuators. The special hybrid technology allows you to select this new design from one source for worldwide application and continue to trade on the traditional Western Electric product line. This hybrid V4055D1035/V4055D1019 is an easy-to reach, cost-effective replacement for on-off valves that require a costly operator exchange program or addition of a separate actuator.

This Honeywell actuator is made to control flow of pressurized air and liquid. It operates through the leading fluid power manufacturer in the world and has been certified by the Fluid Power Association. Honeywell has a 98% market share in valves and controls for industrial use. This actuator fits 0.25-in. NPT valve stems, and 13-sec maximum on time with minimum off time of 0.2 sec., for 1/2-psi control range and is corrosion resistant and maintenance free because it does not have any O-rings or stem packing.          The handle is brought forward to act

If you're looking for direct replacement actuator for use with Honeywell's V4055-XXX-XXXX series valves, then you've found it. This replacement actuator uses an internal motor that is powered directly from the control cabinet and delivers maximum efficiency, quiet operation and years of reliable performance. It comes with a 13 second cycle time, 1/4" NPT conduit valve connection and a 1/2" NPT pilot solenoid valve connection; both feature bright bronze plated contacts for long-term reliability.

An actuating mechanism or actuator is a mechanical component used to start, stop, or otherwise affect the movement of a mechanism under certain conditions. The gas valve (also called an on-off valve or shut-off valve) is a specialized lever designed to direct the flow of gas through a pipe. This Honeywell product is made of stainless steel with an epoxy coating so it can withstand heat and liquid chemicals. No hardware or other tools are required for installation. This fluid power valve is easy to use and install, with low maintenance costs.