Honeywell 36103 , Inc. On-Off Fluid Power Gas Valve Actuator, 120 Vac, 60 Hz

FLUID POWER ACTUATOR 120V 13 SECOND

The Honeywell 36103 Series two-way fluid power actuator is ideal for decelerating and stopping hydraulic or pneumatic powered tools. Its lightweight design allows easy installation in tool controls designed for standard NEMA 4 enclosures. This series features a fast response cycle time of 13 seconds. Fluid output is a maximum of 0 to 6 GPM with a pressure of 500 psi and flows through a 1/4-inchNPT conduit connection.

The Honeywell 36103 Fluid Power Valve Actuator is a 2/2 position, 120 volt motor with built-in handle and on/off switch. For use industries requiring a high burst strength, this actuator is ideal for a variety of applications including: agricultural, automotive, construction, food processing, telecommunications and vending.

The Honeywell 36103 is a positive shut-off gas valve actuator. The water-cooled, cast aluminum enclosure chassis is fitted with an explosion proof motor and an integral hold open lever for easy installation. It is a 120VAC 60Hz non-reversing two-stage square wave type compressor with a 13 second delay. The Honeywell valve has 5/8" ANSI ports, and the overall dimensions of this unit are 7"H x 8"W x 6 1/2"L.

The Honeywell 36103 Inc. On-Off Fluid Power Gas Valve Actuator, 120 Vac, 60 Hz enables you to perform a wide range of fluid power applications, including agricultural, construction and material handling machines. It is an integrated unit that handles all the elements of fluid power operation in one unit.

Backed by more than 100 years of experience, Honeywell is setting the standard for combustion controls with the new combined circuit board actuator. The On-Off model 36103 is used as an actuator for steam or hot water heater applications. It activates a pilot light/limit switch in series with a gas valve and a thermostat for pilot or modulating operation. It has a 13 second delay to ensure smooth transition from the pilot to full burner operation. This leads to consistent heat, precise temperature control and reduced maintenance costs.

We have been an active American Manufacturer serving the hydraulic and fluid power industry for over 85 years. We are 50% employee owned and our products are both designed and manufactured in our Ohio facility, which is ISO 9001:2008 Certified.

The 36103 is an on/off actuator valve designed for the 122 and 132S series of deep well pumps. It is compatible with HFE-7 fluid. The 36103 features APACT mounting, eight inch leads, and a 20 second time delay.