Honeywell 3163 Actuator Fluid Pwr Off-Lo-Hi 26 Sec Open 120V Replaces ITT V710 W/Damper Shft

120V FLUID P0WERH HI-LO ACTUATOR 26

The Honeywell H3163 Actuator 120V FLUID P0WERH HI-LO ACTUATOR is suitable for use with most AC/DC motors and some pneumatic actuation systems. This product is constructed from NEMA 1 thermoplastic, and contains a thermoplastic diaphragm that can transfer fluid power into mechanical force. It has an operating temperature range of 32 to 158 degrees Fahrenheit, and the maximum continuous pressure that the device can handle is 20 PSI

Honeywell #6 Actuator. Genuine Honeywell replacement for many actuators listed under Honeywell part # 61-1116, 662-1128 & 662-0608. Compatible with others listed under ITT/Viktor # V710, V713 & V715. * 120VAC hi/lo power control fluid power actuator 26 sec open time 1 sec closing time Includes damper shift kit Covered by Honeywell 18 month warranty

Hi-Lo fluid power 0-10V Actuator and Damper Shifter for 26 second, 2-step. Replaces ITT V710, ITT B700 and B670

Adjustable thermostat: Yes. Includes installation instructions: Yes. Damper: Yes. Number of outputs: 1. HONEYWELL V710 FLUID POWER ACTUATOR WITH DAMPER SHIFT 120V 60HZ 3163 3163-V710 This Honeywell V710 Fluid Power Actuator is used in conjunction with the damper shift on equipment that requires AC fluid power to control a damper movement up or down within a given temperature range. The Honeywell V

The new Honeywell 26 Series Fluid Power A26L has a center changeover piston, two-way high/low pneumatic cylinder provides smooth transitions between off, on and intermediate positions limited to half-strokes. It is for liquids up to 6,000 cPs, specific gravities up to 1.7. The wide operating range makes the A26L ideal for a variety of industrial and commercial end uses.

This ITT V710 fluid power actuator is a 120V, 50-60 Hz actuator that has an 0.14 dia. output shaft, 26 second off time, and a 1 second fluid power delay on high stroke. This actuator has a reduction ratio of 200:1 and includes position feedback potentiometer and damper shift package. The housing is essentially the same as V711 except for the extended tang that compensates for longer stroke required by the higher reductions of the

The HONEYWELL 3163 Series Hi/Lo Flow Actuator is a flow control device that modulates the flow of water or steam through a dampened shuttle valve with hardened PTFE blend seats that properly time the flow of high and low fluid power to actuators.