Honeywell M-501054 Analytics CAL.GAS CYL. 58L 5PPM NO2

CAL.GAS CYL. 58L 5PPM NO2

The Honeywell M-501054 Analytics CAL.GAS CYL. 58L 5PPM NO2 is part of the Series 58, 50 Series Analytics Calibration Gas Syringes line. All Honeywell gas cylinders are constructed using tough EPDM rubber. They include a built-in O-ring seal with three gas burst/leak detectors for maximum safety and precision, these features along with the ability to be recharged with standard regulators make the Honeywell range ideal for numerous analytical applications. Versatile and durable, all of these cylinders can be used over and over again, making them great

The Honeywell Analytics CalGas Cylinder 58L 5PPM NO2 is ideal for hazardous area classification in petrochemical, food processing, pharmaceuticals, cosmetics, healthcare, general industry, paint shops and laboratories used to contain volatile flammable gases that are classified as flammable gases in concentrations greater than 10% by volume. It includes features such as aluminum construction for corrosion resistance, adjustable pressure regulator output with dial gauge, double fail-safe design for over pressure protection.

Honeywell Analytics 5PPM NO2.0 Analysis Capable Gas Monitor, Model M-501054, 58 liter pneumatic cylinder tank with 1/4" NPT fitting and 1/4" NPT leak detector ports and two 0-25% level sensors.

The Honeywell Analytics Cal-Gas 58CL, with AutoMixTM for NO2, features a dual wavelength laser path flow cell plus an onboard HEPA filter to detect 0.5 ppm levels of NO2. With its automated photoionization source (APS) and ratiometric detector, this analyzer is ideal for HVAC performance testing, duct leakage testing, indoor air quality management, and other applications that require low detection limits and reliability for continuous readings. The gas cylinder pressure regulator (CPR) is built in to the system to control pressure during calibration.

Calculates the amount of gas generated from a sample from 5 ppm to 10% by volume. M-501054. Gas generated by burning a sample of the target gas is collected in a calibrated cylinder and analyzed for percent volume of nitrogen or oxygen, displayed as a percentage of Nitrogen or Oxygen content on a digital display. For Nitrogen determinations only, use an electrolytic cell with a special glass fiber membrane polarizer with Hg lamp illumination.

This part allows you to convert your instruments to non-hazardous calibration gas. It is supplied as a cylinder with screw cap and piston.

The M-501054 is an analytical calorimeter. The accurate solution is automatically dispensed into the gas cylinder. The advanced design provides both high accuracy and fast heating of the sample, thus completing the analysis process in less than five minutes.

Meets EPA requirements for a non-regenerative gas combustor used for building heating and cooling

HONEYWELL NEEDLE SEATING NEEDLE;;;;;; 51S3822; 0.019"…

Honeywell Analytics Indoor Air Quality Sensor – M5014: Offers you real-time indoor temperature and relative humidity readings, and tracks and logs up to 12 months of data on the unit so you can monitor levels of various gases such as Carbon Dioxide (CO2), Carbon Monoxide (CO), Nitrogen Dioxide (NO2), and Volatile Organic Compounds (VOCs). The HONEYWELL PREMIERE IAQ THRESHOLD ALARM is programmed to sound an alarm if CO2 levels reach a potentially dangerous level. The display has a low battery signal to remind you when

This product is a replacement part for: Honeywell Analytics, Model M-501054, For Use With Serial Numbers Beginning M-5000001 and Above