Honeywell M6284D1000-S Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U M7285C-c2

24v NSR 150#in Flt SlaveMotor

M6284D1000-S Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U M7285C-c2 24v NSR 150#in Flt SlaveMotor

The 2 Modutrol motor-spring return and non-spring return dash switches for heating and air conditioning units are aluminized steel/brass construction with a black plastic legend and are UL/CSA certified for use in hazardous locations. The switches are rated 150#in Flt, 24v dc.

Motor features, both NSR and non-spring return. Solid state micro-processor control with electromechanical limit switch shut offs. Motor is permanently mounted on three point mount for vibration reduction and increased reliability. Aluminum heat sink extends unit life by dissipating heat generated during operation. #10 x 2" screws are secure the motor to the mount frame and provide electrical connection. The 2 mm pan head screws do not mar or damage the pan deck surface to which they are secured, which allows replacement of the rear cover of the pan without having to remove any screws. These screws also feature captive slot heads for trouble-free

The 2-speed series 2 motor-spring return or non-spring return (NSR) is for use with standard speed control switches and is ideal for general purpose applications. This NSR linear actuator comes with a built-in wire harness and connector, preinstalled limit switch and overload protection, and a one piece case with steel constructed endss. The 2-speed series 2 comes with an adjustable limit position adjustments up to a +/- 450 count.

The M7285C-c2 is a 6.0 amp non-spring return (NSR) slave motor. It will fire once on its own and then stop. It needs to be operated either by an M8291A800-c2 or M8292-c1 master, or the M6284D1000 master to be able to fire again. The main purpose of this type of controller is for applications where the operator is always pushing the up or down buttons, such as when manually opening and closing a loading dock door. Or applications including an operator button that must be held in the desired position

The M6284D1000-S and M7285C-c2 combination are used on conventional and jumbo series panels. The M7285C is the slave motor used on the M6284D1000-S. This combination is also available in a spring return only (SRO) version.

Modutrol Motor-Spring Return and Non-Spring Return - /U - 120/208V AC - 1.0 HP - M6284D1000-S Series 2 - Male Motor Pin C-2 Power inlet (lead sold separately)