Honeywell M7294A1010 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - /U M7285C-c2

"2-10VDC

The 2-10VDC Series Type 20 modutrols are designed for low-current, continuous speed control of a wide range of fan and blower applications.

Honeywell's M7294A1010 Series 2 Modutrol Motor-Spring Return and Non-Spring Return provides precise positioning for a wide range of industrial applications. Designed for two to ten volt applications, this potentiometer allows +/- 50% travel which delivers a wide range 10 to 200 counts per revolution.

The M7294 Series has an operating range of +/-10VDC. Operating voltage range: +5 to +15 volts DC. Speed control is required for most application parameters.

The Honeywell M7294A1010 Series 2 Modutrol Motor-Spring Return and Non-Spring Return – /U is powered by your network through PoE technology. It allows for easy door operation, smooth service door travel, and no service door straining during movement.

Honeywell M7294A1010 Series 2 Modutrol Motor-Spring Return and Non-Spring Return - Control Availability: Rotary or Toggle Switch. Power Rating: 5VA Maximum, 10VDC. For use with compatible 2-wire motors from 1/8" to 1/2" in diameter, 1/4" shafts and up to 1000 RPM at 108 Lb-in of torque.

M7294A11,S M7294C560VDC,140MCG PUSHBUTTON SELECTOR CONTROL Pushbutton selector control has forms M7294A and M7294C. Switch gear is operating on spring return (in all applications) and is supplied with 2 control shafts allowing end connections of either momentary or maintained.

Each of the two two-wire leads is terminated with a 5-pin DIN connector.