Honeywell MP909D1318 Pneumatic Damper Actuator - /U MP909-c10

PNEUMATIC DAMPER ACTUATOR 8-13# 2-3

PNEUMATIC DAMPER ACTUATOR 8-13# 2-3 1420mm P/N: MP909D1318

Pneumatic Damper Actuator 8-13# 2-3"

Pneumatic damper actuator 8-13# 2-3. Spring return on push rod and normally closed transmitter output. E-certified per UL 1077. CSA certified. Contact manufactures for higher & lower forces and special configurations.

The 909-C10-1/U Pneumatic Damper Actuator 8-13# (136-261 psi) 2-3 is a damper actuator that accepts a 0.18 to 0.63" (4.5 to 16 mm) input shaft and provides a 1/2" NPT outlet port at 13 PSI with 2 HP at 1.1 GPM of flow. The 909-C10 is useful for applications requiring little or no flow control, used with most standard pneumatic actuators. This device is built from heavy duty brass and has provisions for external

HONEYWELL'S MP909-C10 HVAC ACTUATOR AND BLACKFILTER FOR THE 909D1318. IT MEASURES 2-3/4" WIDEWITH A 1-3/4" BORE. IT HAS A MAXIMUM FORCE OF 8-13#.

The Honeywell MP909 Pneumatic Damper Actuator regulates the flow of air into a heating or cooling system.This damper actuator is made with a plastic frame, steel shaft, and features chemical-resistant construction.

The Honeywell 909 Series pneumatic damper actuators are designed for use in commercial, industrial and light-commercial applications. They have modulating or on/off outputs and are specifically suitable for use with automated environmental controls.